Development of structure and method of effective binary stabilization of quality parameter in dynamic systems
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 3, Issue 4
Abstract
<p>The issues of stabilization of quality parameters of dynamic processes are considered to be well studied. Traditionally, the negative feedback technology is used for this purpose. The concomitant moment of the negative feedback technique use is the need of research of the dynamic system stability in the range of admissible controls, the choice of the stabilization criterion and stabilization parameters.</p><p>The examples of dynamic systems with continuous and batch technological products feed show that the introduction of negative feedback is not the only alternative allowing to stabilize the quality parameters of output products.</p><p>It is shown that the problems of dynamic systems stabilization are related to the fact that control signals are transmitted as part of control signals of nonlinearity of the system technological part. In this regard, there are problems of stability and quality of stabilization.</p><p>The stabilization method that is free from the influence of the technological part and the system-based sign for classifying system objects are proposed. Using this sign allows classifying the system objects relative to the technological subsystem or the control subsystem.</p><p>The method also provides for the use of system-based principle to determine the optimal control parameters of the stabilization process using the verified criterion of resource efficiency.</p><p>Using the proposed method allows creating automatic dynamic systems, built on a single architectural principle.</p>
Authors and Affiliations
Igor Lutsenko
Keywords
Related Articles
- EP ID EP527979
- DOI 10.15587/1729-4061.2018.131296
- Views 44
- Downloads 0
Design and study of protective properties of electromagnetic screens based on iron ore dust
<p>The study of the chemical composition and dispersion of iron ore dust, which forms during the enrichment of iron ore, proved its suitability to be used as a screening filler in the production of metal-polymer electrom...
Construction of an algorithm for the selection of rigid stops in steel concrete beams
<p>Calculation of steel-concrete beams is performed with a rigid connection between concrete and a steel strip. This is possible if one installs hard stops that prevent the displacement of the strip with respect to concr...
Comprehensive approach to modeling dynamic processes in the system of underground rail electric traction
<p>An analysis of tasks on improving energy efficiency of electric traction systems reveals the need for the introduction of new technologies, namely modern rolling stock with a traction asynchronous electric drive, as w...
The relation of crack propagation behaviour and delamination on Fibre Acrylic Laminates under various cyclic conditions
The investigation of the crack propagation behaviour associating with the delamination in the interface of the laminate of the fibre acrylic laminates (FALs) composite is carried out by subjecting the composite to cyclic...
Studying the influence of hydrothermal treatment parameters on the properties of wheat flour in the technology of a croquette mass
<p class="a">The paper reports a study into the influence of parameters (temperature and duration) of sautéing wheat flour on its waterabsorbing capacity at hydrothermal treatment. It was established that heating the sa...