Development of technology for the production of semifinished products with an emulsion structure based on the decalcified dairy raw materials
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 11
Abstract
<p>It was determined that in a condition of meeting requirements of current normative documents, physicochemical and technological properties of the cottage cheese differ from each other which affects technological parameters of making products based on this cheese. It was proved that in order to stabilize qualitative indicators of the final product, modification of protein substances of dairy stock or the use of stabilization systems of non-protein nature is necessary. It was proposed to use decalcified dairy stock ‒ milk and cheese ‒ as a source of modified protein substances. Expediency of developing the technology of the target semi-finished products was proved. Influence of pH on solubility of protein substances of the cottage cheese was studied. It was determined that the change in pH of the systems based on the cottage cheese results in an increase in the content of soluble protein in the aqueous phase of dispersion which is an evidence of high functionality of proteins of the cottage cheese made from decalcified skim milk. Emulsifying capacity, kinetic and aggregate stability of the cheese and milk mixtures were studied. Based on the obtained data, rational content and the ratio of decalcified dairy and fat stocks in the composition of semi-finished products were determined. Ratios of the cottage cheese to decalcified milk in the range of (90:10) ‒ (70:30) at fat content of 5‒20 % were defined as rational. Rational parameters were experimentally substantiated and the model of the technological system for making semi-finished products with an emulsion paste-like structure was developed. Microstructure characteristics of the semi-finished products were studied. The data of electron microscopy confirmed formation of an emulsion structure in which fraction of fat particles with diameters of 0.25‒0.45∙10<sup>-6</sup> m was dominant which confirms formation of a stable homogeneous emulsion structure of semi-finished products.</p>
Authors and Affiliations
Nataliya Grynchenko, Daria Tyutyukova, Pavlo Pyvovarov, Оleksandr Nagornyi
Keywords
Related Articles
- EP ID EP527929
- DOI 10.15587/1729-4061.2018.127113
- Views 56
- Downloads 0
Oxidation of 4brometylbenzene by ozone in acetic acid
<p>The kinetics and the mechanism of ozonation of 4-bromethylbenzene in acetic acid was studied. The constants of the rate of reaction of ozone with 4-bromethylbenzene and 4-bromacetophenone at different temperatures wer...
Determination of the influence of deflections in the thickness of a composite material on its physical and mechanical properties with a local damage to its wholeness
<p><span style="font-family: 'Times New Roman'; font-size: small;">In the period of technological preparation and initial stages of development in the mass production of composite products, there is a fairly large number...
Determining the regions for efficient use of electrojet lowthrust engines
<p>This work addresses the issues on determining the optimal regions for using propulsion system for spacecraft at low near-Earth orbits. An analysis of spacecraft launches over the past 5 years has been performed. The r...
Analysis and algebraicsymbolic determination of conditions forsafe motion of a vessel in a nonstationary environment
<p class="111">We have proposed a method for the algebraic formalization of predicativedetermining of zones for safe and dangerous areas of navigation for the criterion "Computational stability – continuity".</p><p class...
Improvement of the process of hydrothermal treatment and peeling of spelt wheat grain during cereal production
<p>The influence of hydrothermal treatment (grain moistening, steeping) and peeling duration on the yield and quality of spelt wheat cereal was studied. The mechanism of the influence of the studied factors on the format...