Development of the technology for obtaining engobed construction articles with the "antiquity" effect
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 5, Issue 6
Abstract
<p>The physical and chemical processes that occur when obtaining engobe coatings for construction ceramics with the decorative "antiquity" effect were considered, the composition of the charge, the technology of manufacturing and applying of the coatings on a ceramic product were proposed. The coatings have dark brownish-lilac color with a volumetric effect of light "variability". Engobes can be used when decorating the front ceramic bricks of single annealing with keeping at the maximum temperature of 1,070 °C.</p><p>It was found that to provide a gradient volumetric decorative effect, it is recommended to introduce in the composition of engobe charge the microspheres of TPP fly ash in the amount of 3–5 %, and for the thick brown-lilac color – up to 60 % by weight of manganese ore. To ensure the necessary rheological indicators of the engobe slip and its high adhesion capacity, the fineness of grinding of charge components should be not more than 1 % by the residue on sieve No. 0063. The moisture content of the slip is 45 % and fluidity is 18 s.</p><p>The mechanisms of shrinkage processes of engobe coatings and the ceramic base at different methods for application of the engobe slip on the product were established. To decrease the difference of shrinkage of the coating and ceramics, it is recommended to apply the engobe slip of the developed composition on the dried ceramic semi-finished product.</p><p>After annealing at 1,070 °C, the products are of high quality with the indicator of water absorption of the coating of 5.2–5.4 % and hardness of ~5 by the Mohs scale.</p>The obtained data can be applied in modeling of processes of engobing the products and in the development of compositions of engobe coatings. The practical value of the results consists in creating a new kind of the decorated building products, which enables increasing the market of its sales and enhancing the competitive capacity
Authors and Affiliations
Olena Khomenko, Borys Datsenko, Nataliia Sribniak, Oleksandr Zaichuk, Mykola Nahornyi
Keywords
Related Articles
- EP ID EP668814
- DOI 10.15587/1729-4061.2019.180367
- Views 65
- Downloads 0
Determining electrical losses of the traction drive of electric train based on a synchronous motor with excitation from permanent magnets
<p>We have studied a traction drive based on the synchronous motor with excitation from permanent magnets for its electrical losses. A simulation model of the traction drive is synthesized, which employs the algorithm of...
Analysis of the preform blowing stage when obtaining a polymeric product using the extrusion blow molding method
<p>It was shown that the process of blowing a polymer preform has two characteristic stages. We obtained analytical dependences that link geometric parameters (diameter, wall thickness) of a molded polymeric preform and...
Development of the method of distribution of memory in nonstationary loaded information processing systems
<p>The trend of growing capacity of modern infrastructures and popularity of network services raises the requirements for multi-server information processing systems they work with. The occurrence of events on a regional...
Development of a sol-gel technique for obtaining sintering activators for engobe coatings
<p>We have developed a technology for manufacturing the glass ligaments-activators to intensify the sintering of ceramic materials, specifically engobe coatings. The comparative analysis has been performed into the glass...
Assessment of efficiency of drying grain materials using microwave heating
<p>We present results of experimental work on studying the drying of a dense layer of grain using microwave heating. We investigated a series of techniques to supply heat to grain to assess energy efficiency of a microwa...