Diagnosis with Analytic Model of a Rectifier for Faults of the Rectifier Control
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2018, Vol 42, Issue 0
Abstract
The diagnosis of the electric systems is an actual item for the specialists in domain. Due to the variety of the measurements and multiplicity of faults which can be analyzed, the approach is motivating. The model reproduces the behavior of a system both in normal operation and fault occurrence. The procedure which uses the analytic models compares the system evolution in normal and fault conditions operation. The faults which affect the normal system operation can occur on the supplying side (grid faults), in the rectifier itself (one or more switches in fault), on the load side or in the control circuit of the rectifier. Authors had previously studied different faults within a controlled rectifier-DC motor system. The supplying side faults (broken phase, phase to ground and two phases shortcircuit faults), interrupted or short-circuited switch within the rectifier and excitation disappearance were investigated. The paper deals with the analysis of different faults of the control circuit. The considered faults were the firing pulses lack for one switch or for the two switches on the same arm (phase). The effects on the rectifier operation (waveforms, major values) and on the load behavior are highlighted. As it is shown, the effects on the output waveforms of the two studied faults are quite different.
Authors and Affiliations
Virginia Ivanov, Maria Brojboiu, Sergiu Ivanov
Keywords
Related Articles
- EP ID EP433050
- DOI -
- Views 117
- Downloads 0
Analysis of Direct Current Motors in Dynamic Regimes Using Numerical Techniques
The electromechanical converters and the electric drive systems where they are parts are generally nonlinear systems due to the nonlinear properties of the materials they are built from, as well as the multiple dependenc...
Analysis of Crimped Connections Heat Transfer Coefficient Using Experimental and Numerical Determinations
In this paper is presented an analysis of the influ-ence of heat transfer coefficient on temperature values using numerical and experimental results. The research was car-ried out on a crimped connection used at electric...
Indirect Current Control Algorithm Implementation and Validation, for Active Filtering Using Constant Switching Frequency Hysteresis Controllers
The aim of this paper is the implementation and the experimental validation of a constant switching frequency hysteresis current controller as a part of an active filtering system control algorithm, based on the indirect...
Analytical Algorithms for Synthesis of Modal Controllers by the Maximum Stability Degree Criterion
The practice of synthesis the controllers demonstrates, that for the determination of the dynamic tuning parameters of the controller is more convenient to operate with the analytical expressions with a low volu...
Testing a Filtering and Regeneration System on a Recuperative Stand
The paper has three main objectives: the presen-tation of a laboratory model of a system for active filtering and regeneration (SISFREG) developed through an applied research collaborative project in the frame of Partner...