Diagnostic testing the solar power equipment in logic 2- and 3- valuable
Journal Title: Bulletin of the Military University of Technology - Year 2017, Vol 66, Issue 1
Abstract
The article presents the problem of the study of developed diagnoses in logic2- and 3-valuable diagnostic system (DIAG 2) devices of the solar power. For this purpose, a functional-diagnostic model of solar power devices has been described. On the basis of the elaborated model of the investigated object, a set of basic elements and a set of diagnostic signals, that are generated by the j-th elements of the functional object, have been determined. Also, there was given a brief description of intelligent diagnostic (DIAG 2) system used for the study. The system (DIAG 2) is a proprietary development of the authors. Diagnostic software in (DIAG 2) system works on the principle of comparison of the set of vectors of diagnostic signals with their standard vectors. By comparing the signals, elementary metrics of vectors disparity of diagnostic signals are determined by the neural network. On the basis of the metrics of differential distance, the system inferences about the diagnosis on the state of elements of a basic object. Keywords: technical diagnostics, diagnostic reasoning, multivalent logic, artificial intelligence
Authors and Affiliations
Radosław Duer, Stanisław Duer
Keywords
Related Articles
- EP ID EP189012
- DOI 10.5604/01.3001.0009.9485
- Views 77
- Downloads 0
Measuring System for Batteries Testing
Abstract. During development and research conducted at our Institute we have repeatedly encountered the issues related to the examination of the properties of the power source for engineer equipment. These studies are of...
Badanie chropowatości powierzchni gładkich za pomocą skaterometru kątowego. Cz. 2. Metodyka pomiaru. Wyniki pomiarowe wybranych powierzchni
W artykule opisano metodykę pomiaru parametrów chropowatości powierzchni za pomocą zbudowanego w IOE WAT zautomatyzowanego skaterometru kątowego. Zaprezentowano wyniki pomiarowe dla trzech wybranych polerowanych powierzc...
Fatigue life of materials claded with the method of explosive welding
This paper describes the comparison of fatigue life on bending of two claded materials with the base material. The base material was the carbon steel P3335NH of the thickness of 10 mm and the clad materials was austeniti...
Sztuczna inteligencja w wytwarzaniu oprogramowania — stan aktualny i wyzwania na przyszłość
Od czasu pojawienia się pierwszych metod i narzędzi CASE niewiele zrobiono w zakresie automatycznego wytwarzania oprogramowania. Narzędzia CASE wspierają deweloperów w tworzeniu struktury systemu, definiowaniu interfejsó...
Analysis of exposure and slope of roofs for photovoltaics installation based on airborne scanning data
The limited amount of fossil fuels, their growing price on the market and progressive climatical changes last years caused that more attention have been focused on environment and the renewable sources of energy. This pa...