Digital elevation models of TanDEM-X mission
Journal Title: Bulletin of the Military University of Technology - Year 2015, Vol 64, Issue 1
Abstract
Started in 2010 TanDEM-X mission (TerraSAR-X add-on for Digital Elevation Measurement) is the first spaceborne radar interferometer mission that acquires interferometric data in bistatic InSAR stripmap mode with two spacecrafts TerraSAR-X (TSTSX) and TanDEM-X (TDX) flying in Helix formation. That configuration enables generation of a global digital elevation model compatible with the HRTIRTI-3 standard. This paper presents an overview and specification of primary products of the TanDEM-X mission, i.e. digital elevation models and additional components such as information layers and masks. Moreover, the use of radar interferometry techniques for generation of the digital elevation model (DEM) and applications of InSAR are discribed.[b]Keywords[/b]: TanDEM-X, SRTSRTSRTM, interferometry synthetic aperture radar, digital elevation model, digital surface model
Authors and Affiliations
Małgorzata Woroszkiewicz
Keywords
Related Articles
- EP ID EP62738
- DOI -
- Views 92
- Downloads 0
Prognoza redukcji ciśnienia wybuchu warstwą materiału ziarnistego
W pracy przedstawiono analizę numeryczną skuteczności redukcji ciśnienia wybuchu przekazywanego na strop obiektu poprzez zastosowanie warstwy tłumiącej z materiału ziarnistego, naktórej umieszczono płytę ochronną. Analiz...
Sztuczna inteligencja w wytwarzaniu oprogramowania — stan aktualny i wyzwania na przyszłość
Od czasu pojawienia się pierwszych metod i narzędzi CASE niewiele zrobiono w zakresie automatycznego wytwarzania oprogramowania. Narzędzia CASE wspierają deweloperów w tworzeniu struktury systemu, definiowaniu interfejsó...
Behaviour of ductile low porous materials with strain hardening in Taylor experiment
The paper deals with an analytical solution of a one-dimensional boundary value problem, describing behaviour of a ductile porous cylindrical rod, both during and after Taylor direct impact experiment (Taylor DIDIE). Th...
Effects of Portland cement addition on Young’s modulus of geopolymer concrete cured at ambient conditions
This paper presents the results of Young’s modulus and Poisson’s ratio tests conducted on samples made of low-calcium fly ash-based geopolymer concrete samples and on samples with a 10% addition of Portland cement, cured...
Quality assessment of underwater photogrammetric images for archeology purposes
Archaeological data are usually inherently incomplete, heterogeneous, discontinuous and require frequent updates and possible adjustments. It is important to constantly create detailed documentation, which will precisely...