Diminution Noise and Vibration for Industrial Equipments Designated to Gearbox Testing
Journal Title: Romanian Journal of Acoustics and Vibration - Year 2010, Vol 7, Issue 1
Abstract
The paper refers to a complex algorithm of design test stands for gearboxes. The algorithm pursues the optimization of the complex assembly embodied by the stand. The optimization criteria point to minimizing power supply, to insuring energetic balance at reversed rotation motion and to establishing the correct relationship between torque and angular velocity signs. The former aspect is significantly important for the vibration and noise regime.
Authors and Affiliations
Corina Gruescu, Ioan Nicoara
Keywords
Related Articles
- EP ID EP124179
- DOI -
- Views 73
- Downloads 0
Noise reduction of a water cooler equipment (chiller)
The chilling equipments of air conditioning installations – located on the flat roof – represent the sources of noise which can cause acoustical discomfort to the habitants from the neighborhood buildings. The dissertat...
Experimental Investigation of Behavior of Fine Particles in Acoustic Air Flow
This paper deals with the influence of acoustic field on agglomeration of quartz sand particles in the air flow. It is established that particle concentration in polluted air flow decreases in presence of acoustic field....
Finite Element Analysis of thin plates clamped on the rim of different geometric forms. Part II: The Absolute and Relative Variation of Natural Frequencies
In this paper, according to the natural frequencies resulted from the simulation for 30 vibration mode shapes of rectangular, square, trapeze and parallelogram plates that are analyzed with the SolidWorks program, the ab...
Diminution Noise and Vibration for Industrial Equipments Designated to Gearbox Testing
The paper refers to a complex algorithm of design test stands for gearboxes. The algorithm pursues the optimization of the complex assembly embodied by the stand. The optimization criteria point to minimizing power suppl...
Linear Motion Profile Generation using a Danaher Thomson Actuator with Ball Screw Drive
A Danaher Thomson linear actuator with ball screw drive is used here to generate vibrations in the 1-3 Hz frequency range. More precisely, the linear motion profile corresponding to the vertical displacements induced und...