Direct gelcast3D Printing of Multi-material AlN Interposer and Mo
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 9
Abstract
In this paper, we investigate the use of direct gelcast 3D printing method to produce near net shape multimaterial component using the natural-occurring gelcasting monomer, ovalbumin for both AlN ceramics and Mo metals. The simplified process will able to directly produce parts from CAD design into functional multimaterial parts. The multi-material 3D structure was printed using a thick paste extruder, followed by sintering to 1600oC to form the final functional part, a high-performance circuit. The result shows that the highperformance circuit functions well with the light emitting diode (LED) having a good electrical conductivity of 4.1 x 10-4.cm and high thermal conductivity of 17 W/mK.
Authors and Affiliations
W. H. Kok, K. H. Cheung, Winco Kc Yung, Desmond T. C. Ang
Keywords
Related Articles
- EP ID EP395172
- DOI 10.9790/9622-0809042531.
- Views 133
- Downloads 0
Experimental Study on Surface Roughness by Using Abrasive Particles
New advancement of technology and never satisfying demands of the civilization are putting huge pressure on the natural fuel resources and these resources are at a constant threat to its sustainability. Surface finish ha...
Effect of Gradation and Plasticity on Compaction Characteristics of Red Gravel Soils
Red gravel soils are widely distributed over the north coastal districts of Andhra Pradesh. These soils are highly desirable for construction activities due to their inherent advantages. To use these soils in various Geo...
Investigation on Turbo-matching appropriateness Turbochargers with Trim 70, 72 and 75 for a Commercial Truck Engine
The turbocharger is a charge boosting device in Internal Combustion engines and which helps to maintain good operating performance even at at high load condition. Inappropriate selection of turbocharger may leads to havo...
Measuring the Thermal Conductivities of Low Heat Conducting Disk Samples by Monitoring the Heat Flow
This article aims to establish an experimental procedure to measure heat transmission coefficients in low heat conductive materials. The newly developed model takes as starting point the application of Fourier’s law to a...
Determination with Deep Learning and One Layer Neural Network for Image Processing in MultiSlice CT Angiogram
Today’s world Coronary artery disease is the most common cause of death worldwide and thus early diagnosis. Well-timed opportune of this disease can lead to significant reduction in its morbidityand mortality in both you...