DISCHARGE CHARACTERISTICS OF GLIDING ARC PLASMA REACTOR WITH ARGON/NITROGEN
Journal Title: JOURNAL OF ADVANCES IN PHYSICS - Year 0, Vol 7, Issue 1
Abstract
Gliding Arc Discharge plasma has properties of both thermal and non-thermal plasma conditions. Gliding arc discharge plasma in the atmospheric pressure with argon/nitrogen and its characteristics are described. Some experimental results about alternating current gliding arc plasma generator have been obtained. It seems that the current density strongly depends on the gas, and increased with increasing discharge current and gas flow rate. Also, the discharge current of gliding arc Discharge plasma in Nitrogengas is greater than one in Argon gas because of Nitrogen gas need to higher breakdown voltage than Argon gas. The intensity of gliding arc discharge plasma increased with increasing the gas flow rate. In addition to the oscillograms of discharge current in each case of Argon & Nitrogen were obtained. Electron temperatures of Argon and Nitrogen plasma were calculated to be 22800 K, 8400 K. The characteristics of both Argon & Nitrogen gases in atmospheric pressure were investigated like current density, electron density with flow rates (5, 10, 20, and 40) Standard Cubic foot per Hour. All the experimental results were tabulated.
Authors and Affiliations
Gamal Elaragi
Keywords
Related Articles
- EP ID EP653601
- DOI 10.24297/jap.v7i1.1736
- Views 53
- Downloads 0
Conserved Quantities for the General Linear Heat Equation
In this paper, conserved quantities are computed for a class of evolution equation by using the partial Noether approach [2]. The partial Lagrangian approach is applied to the considered equation, infinite many conservat...
TRANSFER OF ELECTRIC CHARGE THROUGH Al-Se95Te5<LSm>-Te STRUCTURE
It is established that current passing through Al-Se95Te5<Sm>-Te structures is carried out by monopolar injection mechanism at participation of traps for holes. It is shown that the doping by samarium strongly infl...
Considering skin physiology in capacitive-coupled hyperthermia
Dominant technical solution for oncological hyperthermia devices is capacitive-coupling. However, it has the challenge of overheating the surface of adipose layers and burning cutaneous structures. The main technical sol...
Influence of Low Ti-Element Additions on The Microstructure, Melting Properties and Creep Behavior of Sn-Ag-Cu Lead Free Solders
Sn-3.5wt.%Ag-0.5wt.%Cu is one of the alloys considered for replacing SnPb solder alloys in electronic ambiance. In the present study, the effect of minor additions of Ti (0.25, 0.5, 1.0 wt.%) on the microstructure, creep...
ON THE DISTRIBUTION OF LUMINOUS MATTER IN A FRIEDMANN UNIVERSE
The Friedmann model is considered through stereographic projection of the Friedmann-Roberson-Walker metric for open, flat and closed matter-dominated universe. A relation between redshift and number density of galaxies i...