Discovery and development of metallocene-based polyolefins with special properties
Journal Title: Polyolefins Journal - Year 2015, Vol 2, Issue 1
Abstract
Beside Ziegler-Natta and Phillips catalysts the development of methylaluminoxane (MAO) as cocatalyst in combination with metallocenes or other transition metal complexes for the polymerization of olefins has widely increased the possibilities in controlling the polymer composition, polymer structure, tacticity and special properties with high precision. These catalysts allow the synthesis of isotactic, isoblock, syndiotactic, stereoblockor atactic polymers, as well as polyolefin composite materials with superior properties such as film clarity, tensile strength and lower content of extractables. Metallocene and other single site catalysts are able to copolymerize ethene and propene with short and long chained a-olefins, cyclic olefins, or polar vinyl monomers such as ethers, alcohols or esters, especially, if the polar monomers are protected by aluminum alkyls. Different vinyl ethers such as vinyl-ethyl ether, vinyl-propyl ether, vinyl-hexyl ether, and 2,7-octadienyl methyl ether (MODE) were copolymerized with olefins using triisobutyl aluminum as protecting agents. Polar monomers could be incorporated into the polymer chain by up to 16 mol%. Such copolymers show better gas barrier and surface properties, as well as solvent resistance and they are suitable for blends of polyolefins with polyethers and other polar polymers because of an excellent adhesion of the two polymers.
Authors and Affiliations
Walter Kaminsky, Mercia Fernandes
Keywords
Related Articles
- EP ID EP283079
- DOI 10.22063/POJ.2015.1101
- Views 148
- Downloads 0
Amoco CD commercial polypropylene catalyst tailor-made for the Amoco-Chisso gas phase process
The commercial profile of the Amoco CD MgCl2 supported polypropylene catalyst is presented. The development, the unique method of preparation/production, with emphasis on particle morphology, and the parameters affecting...
Theoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process
In this study, thermoplastic polyolefin elastomeric (TPO) nanocomposites were fabricated by friction stir processing. The effect of different pin geometries on clay dispersion and mechanical properties of the TPO nanocom...
Influence of branching on the rheology and morphology of melt state long-chain branched polypropylene/polybuten-1 blends
In this study, the compatibility of polypropylene (PP)/polybutene-1 (PB-1) homopolymer blends before and after a long-chain branching process was studied. The blends were prepared and long-chain branched directly via a r...
Preparation and characterization of a bionanopolymer film for walnut packaging
To apply the nanomaterial as a component in the packaging material structure, in this research, the carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared with three levels of nanoclay particles (0.5, 1...
Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor
Pyrolysis of low density polyethylene (LDPE) by equilibrium fluid catalytic cracking (FCC) was studied in a stirred reactor under different process parameters. In this work, the effect of process parameters such as degra...