Discussion on the Function and Interface Schemes for Interlocking System of Multi-level Railway Network Junction Station
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 10
Abstract
Objective In the multi-level road network, junction stations of lines with different signal systems face quite a number of challenges. In order to meet the new demands of multi-network interoperation, it is necessary to conduct in-depth research and propose interlocking functions and interface configuration solutions for junction stations. Method By comparing the differences between interlocking systems under CBTC and CTCS-2 signal systems, signal control function, construction and operation demands are analyzed in detail, and functional requirements of the junction station interlocking system are clarified. On this basis, the interface objects and interface contents of the interlocking system are further analyzed. Finally, a configuration scheme for the interlocking interface of the junction station is constructed. Result & Conclusion The junction station interlocking system not only needs to complete the basic route safety protection function, but is also able to adapt to the requirements of various signal systems for basic information provision, capable of mobile blocking adaptability, as well as comprehensive functions such as section block combination, platform door control, over lap section protection, automatic return route processing, flexible operation adjustment and adaptation. At the same time, the junction station interlocking system should support multi-channel interfaces such as signal safety data network, wired ring network, wireless network, relay, etc. to ensure the compatibility and reliability of the system.
Authors and Affiliations
Minhui ZHANG, Ruhan WU, Huaxiang LIU, Rui SONG
Keywords
Related Articles
- EP ID EP749258
- DOI 10.16037/j.1007-869x.2024.10.055
- Views 78
- Downloads 0
Application of DC Power Supply Air-conditioning Units in Urban Rail Transit Vehicles
［Objective］ Currently, air-conditioning units in urban rail transit vehicles predominantly use an AC (alternating current) 380 V power supply mode, which requires two power conversions before reaching the end-use equip...
Impact of Wheel-rail Lubrication on Outer Rail Wear in Metro Small Radius Curved Segments
[Objective] For metro lines with high proportion of small radius curved segments and severe rail wear, lubrication can alter wheel-rail contact area friction coefficient and in turn effectively reduce rail wear, thus it...
Optimization of Friction Stir Welding Process Equipment Based on TRIZ Theory
［Objective］ Friction stir welding is a key welding technology for next-generation. To address welding quality defects associated with friction stir welding, it is necessary to conduct an in-depth study of its welding p...
Protective Measures for a Tunnel on Xi’an Metro Line 6 Crossing Ground Fissure Zone
Objective Xi’an Metro Line 6 Phase Ⅱ project encounters seven ground fissures along one of its tunnels, the poor engineering properties may cause partial tunnel collapse and uneven settlement at the base, exacerbating gr...
Application Research on Vehicle-ground Integrated Sensing System of Suzhou High-tech Zone Tram
Objective In the semi-independent right-of-way operation scenario of the tram, there exists the potential risk of pedestrians or vehicles entering the track area, especially in the intersection area. The sensing system d...