Distorsion of Isochromatic Fringes in the Process of Stress Measurement in Structural Part by Photoelasticimetry
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2018, Vol 68, Issue 2
Abstract
In the article we show the possibility of distorting the results of the experiment by photoelasticity path, in case the isochromatic fringe patterns are recorded by the camera. The recording of the color spectrum may be distorted by inappropriate selection of the recording medium, which is reflected by different types of aberrations. Transferring a record to a computer allows you to automate the experiment process, thus saving time to work with isochromatic fringes. As an example, we present the experimental determination of the stresses of the rotor with a symmetrical arm. The analysis was performed using software developed by the authors. This software enables full automation of the experiment process. The rotor is investigated by the method of reflection photoelasticity. The experimental solution is realized as a case of periodically repeating dynamic effects, in which a stroboscopic source of white light is needed. The results of the experiment are compared with the numerical solution and their dependence is represented by diagram.
Authors and Affiliations
Peter Frankovský, Oskar Ostertag and Ingrid Delyová
Keywords
Related Articles
- EP ID EP43939
- DOI https://doi.org/10.2478/scjme-2018-0017
- Views 184
- Downloads 0
Identification of Fatigue Cracks on the Basis of Measurable Changes in System Dynamics
In order to obtain correct experimental results, fatigue strength tests carried out on the basis of a measurement setup using dynamic excitation generated by inertial force require test completion criterion to be speci...
All-Pass Filters in the Systems of Active Vibration Control of Weakly-Damped Systems
The problem of active vibration control of weakly damped mechanical structures is potentially unstable modes of vibrations due to the positive feedback for some vibration modes. The paper will discuss the change of pos...
Effect of Non-Uniform Torsion on Elastostatics of a Frame of Hollow Rectangular Cross-Section
In this paper, results of numerical simulations and measurements are presented concerning the nonuniform torsion and bending of an angled members of hollow cross-section. In numerical simulation, our linearelastic 3D Tim...
Comparison of the Viscous Liquids Spraying by the OIG and the Oil Configurations of an Effervescent Atomizer at Low Inlet Pressures
In this work we studied the influence of the fluid injection configuration (OIG: outside-in-gas, OIL: outside-in-liquid) on the internal flows and external sprays parameters. We sprayed the viscous aqueous maltodextrin...
Tracking Filter Design for Predictive Maintenance of Jet Engine – Different Approaches and their Comparison
The aim of this paper is to design, implement, test and compare several tracking filtration methods for predictive maintenance of a jet engine. Based on literature review multiple possible methods are described. Approp...