Dynamic and Sensitivity Analysis General Non-Conservative Asymmetric Mechanical Systems
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2018, Vol 68, Issue 2
Abstract
In this paper the concept of generalized form of proportional damping is proposed. Classical modal analysis of non-conservative continua is extended to multi DOF linear dynamic systems with asymmetric matrices. Mode orthogonality relationships have been generalized to non-conservative systems. Several discretization methods of continua are presented. Finally, an expression for derivatives of eigenvalues and eigenvectors of non-conservative system is presented. Examples are provided to illustrate the proposed methods.
Authors and Affiliations
Milan Žmindák
Keywords
Related Articles
- EP ID EP43943
- DOI https://doi.org/10.2478/scjme-2018-0021
- Views 193
- Downloads 0
Modeling of Coolant Flow Within the Spent Fuel Storage Pool of a VVER 440 Reactor
The article deals with modelling of coolant flow within the spent fuel storage pool of a VVER 440 reactor. The spent fuel storage pool is modelled in a state of standard reactor operation. The coolant heating from the...
Dynamic Modelling and Analyzing of a Walking of Humanoid Robot
This paper focuses on the walking improvement of a biped robot. The zero-moment point (ZMP) method is used to stabilise the walking process of robot. The kinematic model of the humanoid robot is based on DenavitHartenbe...
Mechanical and Wear Properties of Friction Stir Welded 0–6Wt% nAl2O3 Reinforced Al-13Wt%Si Composites
Friction Stir Welding (FSW) of an Al-13%Si alloy matrix reinforced with 0, 3 and 6 wt% Al2O3 nanoparticles (nAl2O3) is performed and the optical microstructures, tensile strength, hardness and sliding wear properties o...
Studies on Improvement of Performance of Compression Ignition Engine Fuelled with Mixture of Honge Biodiesel and Tire Pyrolysis Oil
The biodiesel has lower volatility and is costlier than the fossil diesel. Hence it is necessary to add a low cost fuel which has higher volatility, with the diesel. The tire pyrolysis oil (TPO) produced from waste tire...
Natural Fibers and Biopolymers Characterization: A Future Potential Composite Material
Now days, green composite materials are now gaining popularity for the various industrial applications. It is a combination of naturally occurring reinforcement like jute, sisal, flax, hemp, and kenaf; and matrix mater...