Effect of Co2 Laser on Some Properties of NI46TI50CU4 Shape Memory Alloy
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
The microstructure, mechanical and corrosion properties of Nickel-Titanium-Copper shape memory alloy were studied in this paper. The Ni46-Ti50-Cu4alloy was prepared using the powder metallurgy technique, and then mixed and cold pressed at (600,700 and 800) MPa to arrangement cylindrical specimens of (11mm diameter×16.5mm length).After pressed the samples had sufficient green strength for handling. The specimens were consequently sintered at (850,900 and 950) ˚C for five hours in an electric vacuum furnace. The optimum compacting pressure and sintering temperature were identified using Minitab program. Samples prepared under the optimum process conditions were then irradiated using a continuous CO2 laser at5w, 10w and15w. Multiple investigations were conducted on the alloys including shape memory effect, microstructure, scanning electron microscopy (SEM) and hardness. The results indicate that increase hardness after Laser processing
Authors and Affiliations
Keywords
Related Articles
- EP ID EP347339
- DOI 10.24247/ijmperdapr201852
- Views 61
- Downloads 0
Influence of Moisture Absorption and their Effect on the Physico-Mechanical Properties of Coir-Luffa Fibre Reinforced Polymer Matrix Composites
Mechanical properties of fiber reinforced polymeric materials are significantly more essential under the various environmental condition due to higher aging resistance and durability. Composite specimens containing luffa...
Real-Time Generator Fuel Level Measurement Meter With Ultrasound Sensor and Data Acquisition System
The usage of Generator has changed into an especially standard in each useful sense each lethargic establishment affiliations, Industries, centres, Townships et cetera, while by using these Generators, assorted bothers a...
Evaluating the Green Supply Chain Management Barriers in a SME: An AHP Approach
Over the last decade, Green Supply Chain Management (GSCM) has been in focus, as there has been lot of demand from environmental groups for optimization of resources in order to protect the environment. Hence, both the g...
Study the Comparison of Wear Characterization Al6061/ Red Soil and Al6061/ Granite Dust Based Metal Matrix Composite Material
Aluminium based metal grid composites (MMCs) are well known materials for basic applications in the air ship and vehicle ventures, exceedingly wear and erosion resistance, conductive, lightweight and have a high quality....
EFFECTS OF WATER DIESEL EMULSION ON DIESEL ENGINE
The Water Diesel Emulsion (WiDE) fuel shows nepotism in terms of environmental and economical aspects. In the present investigation, WiDE is used as fuel for the diesel engine. Here, WiDE was prepared with various water...