Fem Anlaysis of Microwave Hyperthermia and the Effect of Sar &Temperature Elevation on Liver Tumour
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 4
Abstract
Radio-Frequency therapy is a common treatment in the cancer therapy. The goal of this paper is to study the effect of electromagnetic waves on the liver cancer tissue. This liver model will allow us to examine the effect of temperature raise, temperature profile and Specific Absorption Ratio. In Microwave hyperthermia therapy, soft tissues are targeted for the short duration of time, which is responsible for the coagulation of cancerous cells. In this review, the microwave coaxial antenna operating at the frequency of 2.4GHz by varying the opening size of the antenna for the removal of the tumor.3D CAD model of liver and cancerous tumor was used for the FEM analysis. RF wave used in the FEM analysis are of frequencies of 2.4GHz respectively. Analysis was done by using the COMSOL-Multiphysics.
Authors and Affiliations
Sajan Singh, Satbir Singh Sehgal, Harjot Singh Gill
Optimization of Wire EDM Process Parameters for Machining of AMCs (413/B4c) using Taguchi Technique
The effects of the machining parameters in Wire Electrical Discharge Machining (WEDM), by varying pulse on time, pulse off time, gap voltage and wire feed on the machining characteristics of fabricated Aluminium Matrix C...
A Comparative Assessment of Tensile Strength and Corrosion Protection in Friction Stir Processed AA7075-T651 Matrix Composites using Fly Ashes Nanoparticles as Reinforcement Inhibitors in 3.5 % NaCl
This research presents the performance of eco-friendly waste materials, which are wood fly ash nanoparticle (WFA-NPs) and coal fly ash nanoparticles (CFA-NPs) as economical reinforcements corrosion inhibitors on friction...
EXPERIMENTAL INVESTIGATION ON INFLUENCE OF FUNCTIONALIZED MULTI-WALLED CARBON NANOTUBES ON SURFACE ROUGHNESS IN DRILLING OF CFRP COMPOSITES
This paper presents the effect of carboxyl functionalised multi-walled carbon nanotubes on the surface roughness of drilled holes in carbon fibre reinforced plastic (CFRP) laminates. Drilling tests were conducted on CFRP...
Design and Analysis of Vehicle Front Axle
A hub is a focal shaft for a turning wheel. On wheeled vehicles, the centre might be settled to the wheels, pivoting with them, or resolved to its environment, with the wheels turning around the hub. The axles serve to t...
Design and Analysis of Wheel Head in Cutter and Tool Grinder
The work is entirely about “Design and Analysis of Wheel Head in Cutter and Tool Grinding Machine “. Wheel Head is a major part of a grinding machine, which consists of Various sectioned components, namely the wheel head...