Effect of environmental temperature on pacing during a simulated 16 km cycling time trial
Journal Title: Journal of Science and Cycling - Year 2014, Vol 3, Issue 2
Abstract
Background: In cycling time trials (TT) the aim is to produce greatest average power possible for the duration of the effort; to do this an athlete must distribute their effort efficiently to ensure that they do not fatigue early but finish the event having exhausted their energy stores (Atkinson et al, 2007: Sports Medicine, 37, 647-667). This distribution of effort is initially determined by conscious control (selection of a pacing strategy), but is influenced by afferent feedback from both internal sensations and environmental factors (St. Clair Gibson & Noakes, 2004: British Journal of Sports Medicine, 38, 797-806). Performance in prolonged endurance exercise is inversely related to environmental temperature; this is thought to be due to central nervous system regulation of effort in response to increased core temperature. While this negative effect of hot conditions on TT performance is well established, less is known about the effect of environmental temperature on pacing during TT efforts, in particular in short time trials which are common in amateur cycling as well as in professional stage races such as the Grand Tours. Purpose: The aim of this study was to examine the effect of environmental temperature on performance and pacing during a simulated 16 km cycling time trial.Methods: After familiarisation, six moderately trained male cyclists (age (mean ± s) 20 ± 1 year; VO2max 45.3 ± 7.3 ml.kg-1.min-1, power at VO2max 312 ± 28 W) completed self-paced 22-minute trials on an electromagnetically-braked cycle ergometer in hot (30ºC, HOT) and temperate (15ºC, COOL) conditions. Participants were instructed to complete as much work as possible during the trial and the only feedback provided was cadence and time with 5 and 1 minute remaining. Heart rate, core temperature and rate of perceived exertion were recorded at two minute intervals.Results: Mean power was slightly lower in HOT than COOL (201 ± 38 W vs. 209 ± 43 W); the difference was not significant. Core temperature and heart rate were both significantly higher in HOT than COOL (temperature: 37.3 ± 0.5 ºC vs. 36.4 ± 0.9 ºC; heart rate: 173 ± 7 bpm vs. 166 ± 11 bpm); rating of perceived exertion did not differ between the two conditions. Pacing appeared to differ slightly: when power output was compared across four quarters of the time trial the athletes adopted a positive split with end-spurt in HOT (Q1: 103% overall mean power, Q2: 100%, Q3: 97%, Q4: 100%) and a negative split with end-spurt in COOL (Q1: 97% overall mean power, Q2: 98%, Q3: 99%, Q4: 107%); the difference was significant in the last quarter.Discussion: The main outcome of this study was that pacing strategy differed slightly with environmental conditions, despite relatively similar overall performances in both trials. The effect of environmental conditions on pacing and the mechanisms involved warrant further investigation, given the important of pacing in successful time trial performance for athletes who train and compete under a range of environmental conditions.
Authors and Affiliations
S Bailey| Academy of Sport and Physical Activity, Sheffield Hallam University, United Kingdom, C O'Hagan| Academy of Sport and Physical Activity, Sheffield Hallam University, United Kingdom
Keywords
Related Articles
- EP ID EP2863
- DOI -
- Views 417
- Downloads 21
Gross efficiency and cycling performance: a brief review
Efficiency, the ratio of work generated to the total metabolic energy cost, has been suggested to be a key determinant of endurance cycling performance. The purpose of this brief review is to evaluate the influence of gr...
Preliminary results: A comparison of specific imu-based calibrations for cycling vs. conventional methods.
Recent technological advances in MEMS allow considering the biomechanical evaluation of cyclists outside the laboratory (road, track cycling, etc). Indeed, optoelectronical motion capture in cycling is commonely used in...
Internal Mechanical Power During Cycling Using Non-Circular Versus Circular Chainrings
Introduction: Non-circular Rotor Q-Rings have been shown to increase tangential force during the pedalling downstroke compared to conventional circular chainrings1, and due to this advantage, have been proposed as a pote...
Amateur cyclists can complete the full Tour de France in the same amount of days as professional cyclists
Participating in the Tour de France (TdF), 3.497 kilometres in 21 days, is a challenge for professional as well as for amateur cyclists. The exceptional high demands both physically and mentally enhance the risk of falli...
Estimation of Handgrip Position Based on Force Measurement During Steady Pedaling
There have been many studies on pedaling skills (Bini et al., 2013) to improve cycling efficiency. Riding position of upper body as well as leg motion is very important for cycling because it has a substantial impact on...