Effect of Nanoparticles on the Structure and Properties of Welds Made of High Strength Low-Alloy Steels
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2016, Vol 60, Issue 6
Abstract
The article presents test results concerning the structure of welds made of high strength low-alloy steel 14HGNDC which, in the molten state, was provided with nanoparticles of various refractory compounds including oxides, carbides and nitrides (TiC, TiN, SiC, VC, NbC, TiO₂, Al₂O₃, MgO and ZrO₂). The performed tests revealed the effective use of the nano-oxides of titanium (TiO₂) and zirconium (ZrO₂) enabling the obtainment of high mechanical properties of the weld metal (Rm –708 MPa and 621 MPa, KCV-₂₀ – 60 J/сm2 and 72,9 J/сm2, a – 21 and 19%). The use of a Gleeble 3800 welding cycle simulator made it possible to determine the dependence between temperature ranges of transformations, amount of structural constituents and types of modifying nanoparticles.
Authors and Affiliations
G. M. Grigorenko, Valery A. Kostin, Victor W. Golovko
Keywords
Related Articles
- EP ID EP257962
- DOI 10.17729/ebis.2016.6/9
- Views 83
- Downloads 0
Digital radiography – Preparation of the System for Tests
Digital radiography is becoming increasingly popular in non-destructive tests of welded joints and castings, enabling the obtainment of a repeatable testing method and the minimisation of test time. However, the obtainme...
Effect of Welding Parameters on the Structure, Mechanical Properties and Crack Resistance of Welded Joints Made of Steel 14HGN2MDAFB
The article presents test results concerning the structure and the phase composition of the weld and HAZ metal of welded joints made of high yield point (above 700 MPa) steel 14HGN2MDAFB using the mechanised welding meth...
Robot-like MIG Welding Machines for Large Steel Structures
Weld volume, geometry and quality standards in structures in the wind energy sector demand automation. Conventional industrial robots are often infeasible due to safety factors, cost, work space available and the time-co...
Assessment of Electrode Consumption in Resistance Welding
The article discusses the assessment of electrode consumption during spot resistance welding processes. The process was performed using a manipulator provided with a welding head. During the process, welding parameters,...
Laser Beam Welding of 10 mm Thick T-joints Made of TMCP Steel
The article presents research on the laser beam welding of 10 mm thick T-joints made of thermomechanically worked high-strength steel S700MC without using a filler metal. The research-related tests involved making single...