Digital radiography – Preparation of the System for Tests
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2018, Vol 62, Issue 5
Abstract
Digital radiography is becoming increasingly popular in non-destructive tests of welded joints and castings, enabling the obtainment of a repeatable testing method and the minimisation of test time. However, the obtainment of proper test results requires the verification of quality levels (during tests of products) in accordance with a related standard concerning a given product or following the customer’s specification. In terms of digital radiography, the process of preparation significantly affects test results. For this reason, the article discusses the calibration of a testing system, enabling the obtainment of enhanced detectability and the satisfaction of primary quality requirements.
Authors and Affiliations
Jacek Słania, Marcin Matuszewski
Keywords
Related Articles
- EP ID EP427210
- DOI 10.17729/ebis.2018.5/16
- Views 38
- Downloads 0
Welding Imperfections in Surfaced Layers
The article presents the overview of various welding imperfections based on the classification of PN-EN ISO 6520-1:2009 and formed during surfacing. The article discusses specific surfacing-related imperfections and uncl...
The Use of a Bobbin Tool in the Friction Stir Welding of Plates Made of Aluminium Alloy EN AW 6082 –T6
The article presents test results concerning the friction stir welding of 6 mm thick plates made of aluminium EN AW – 6082. The welding process was performed using a tool consisting of two shoulders and a probe. The test...
Cracking of Welded Structures in Power Engineering Systems
An increase in demand for electric power necessitates the revamping and construction of systems characterised by increasingly high efficiency. The construction of power units exposed to supercritical and ultra-supercriti...
Comprehensive Procedure of the Assessment of the Quality of Welded Joints Made in Alloy INCONEL 617
The development of the power engineering industry forces designers and material engineers to develop and implement new technologically advanced materials, including alloy INCONEL 617. There are numerous works concerning...
Integral Method Enabling the Determination of the Parameters of the Mayr and Generalised Mayr Models of Electric Arc Excited in the Circuit Using the Sinusoidal Current Source
The article presents the primary properties of the Mayr mathematical models, the generalised Mayr model and the Pentegov model of electric arc as well as indicates the limited possibilities of the Mayr model in the accur...