Effect of tribological conditions for properties thermal spraying
Journal Title: Production Engineering Archives - Year 2017, Vol 0, Issue
Abstract
The present contribution deals with the influence of tribological conditions on coating quality. Two types of coatings were selected for analysis WC-WB-CO and WC-FeCrAl, to advise that a new type of coating - carbide green. These coatings were applied to the base material AISI 316L of technology HVOF – High velocity oxygen fuel. The aim of the experimental study was to determine the quality coatings and its resistance to abrasive wear, depending on the number of thermal cycles. It was evaluated hardness, thickness, the resistance to abrasive wear in free abrasives and firmly bonded abrasives. Results of experiments showed a higher resistance of the coating WC-Co-WB.
Authors and Affiliations
Mariana Landova, Janette Brezinova
Keywords
Related Articles
- EP ID EP261127
- DOI -
- Views 75
- Downloads 0
DRAFT QUESTIONS OF 5S PRE-AUDIT WITH REGARD TO HEALTH AND SAFETY STANDARDS FOR TIRES RETREAT-ING PLANT
A continuous technological progress forces an improvement of the production process. The article describes the sole beginning of changes in the process of tires retreading on the 5S management method with regard to healt...
ROTATION RELATED PROBLEMS OF PERSONNEL SERVICES IN OUTSOURCING COMPANIES
The subject of outsourcing of personnel services are functions and auxiliary tasks in the operation of a given enterprise. It is based on outsourcing specific tasks and entire personnel processes, as well as hiring emplo...
Quality analysis of plates for car industry
In 2013, global steel production reached a level of 1.548 million tons. This value indicates that, in the 21st century, steel is still one of the most popular construction materials. In Poland 8.2 million tons of steel w...
EMPLOYING VARIOUS METALLOGRAPHY METHODS AT HIGH TEMPERATURE ALLOY FATIGUE TESTS EVALUATION
Microstructures of superalloys have dramatically changed throughout the years, as modern technology of its casting or forging has become more sophisticated. The first superalloys have polyedric microstructure consisting...
The application of the FMEA method in the selected production process of a company
The aim of this article is to show the use of the analysis of the failure causes and effects as a preven-tion tool in controlling the quality of a given production process in the company. The scope of the work covers an...