Effects of Boron Phosphate Additive on Ceramics with Anorthite Phase
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 2
Abstract
In this study, the anorthite phase was chosen as a ceramic type that can withstand thermal shock. First, boron phosphate was synthesised, boron phosphate was calcined at 1000°C and characterized by XRD and chemical analyzes. On the other hand, in the phase diagram, the most suitable eutectic points covering the anorthite phase (CaO, Al2O3, SiO2) and at the lowest temperature at which anorthite can form are selected. 6 mixtures were prepared using wollastonite, kaolinite and calcite. The 6 mixtures prepared were separated into two equal parts and the second parts were added of BPO4 10%. The mixtures were pressed at the same pressure and cooked under the same conditions and at the same heating rate in the electric oven at 1050, 1100, 1150 and 1200°C. DTA and TGA analyzes were applied to the samples before sintering, and XRD analyzes were applied to the sintered samples. According to the test results, the addition of the synthesized BPO4 has shown that the anorthite phases are formed at temperatures well below the theoretical formation temperatures without swelling.
Authors and Affiliations
Meltem ÇUBUK, Metin GÜRÜ, Bülent BARAN, Ali Sacid AĞIR
Keywords
Related Articles
- EP ID EP490310
- DOI 10.29109/http-gujsc-gazi-edu-tr.370683
- Views 96
- Downloads 0
Hydrological Drought Analysis of Asi River Basin with Streamflow Drought Index
In this study, hydrological drought analysis is carried out by using 52 years (1954-2005) streamflow data of Asi River Basin in the south of Turkey. Streamflow Drought Index (SDI) method is used in determining the drough...
The Effects of Shallow Cryogenic Process On The Mechanical Properties of AISI 4140 Steel
In this study, shallow cryogenic treatments were carried out for various holding time to AISI 4140 steel and the effects of heat treatment parameters on wear behavior, impact strength and tensile strength were investigat...
Predicting Academic Achievement with Machine Learning Methods
In spite of the projects and physical investments implemented in the field of education in our country in recent years, the successes of the students in the national and international examinations has not increased at th...
Determination of Fatigue Resistance of Vehicle Wheels by Structural Analysis
Wheels rim which run under static and dynamic loads on vehicles are critical elements. Running wheels rim on surfaces under repeated stress, depending on the time, after a certain number of repeated, cracks occur. As a r...
Investigation of the Effect of Chip Breaker Form on Surface Roughness and Cutting Forces in AISI 1040 Steel Milling
In this study, the effects of chip breaker forms (E-PL, M-PL, M-PM, M-MM) on the surface roughness and cutting forces were investigated in milling of AISI 1040 steel at CNC vertical machining center. Experimental studies...