Electrochemical Comparative Characteristics of La(Fe,Si)13 Type Materials with Different Content of Co in Acidified Phosphate Environment in Presence of Cl- Ions
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 3
Abstract
In the paper the electrochemical characteristics of alloys based on La(Fe,Si)13 phase have been presented. The material for research was the LaFe11.8-xCoxSi1.2 alloy with different cobalt content. Presented electrochemical characteristics provide information about pitting corrosion. This kind of corrosion is one of the most common local corrosion, it is especially undesirable for multi-phase alloys based on rare earth elements, as it contributes to the sudden and unexpected destruction of the surface of the material in working conditions. In the paper the results of potentiokinetic corrosion tests determined for LaFe10.72Co1.08Si1.2 and LaFe11.00Co0.8Si1.2 alloys in acidified phosphate solution (pH = 3) with different addition of chloride ions (Cl-) have been presented. Also analysis of alloys surface before and after corrosion measurement have been presented. The surface analysis has been carried out on the basis of profilometric roughness tests and optical microscopy observation. The studies have shown low resistance of LaFe10.72Co1.08Si1.2 and LaFe11.00Co0.8Si1.2 alloys to pitting corrosion, which, however, increases with Co content increase.
Authors and Affiliations
Dorota Klimecka-Tatar, Grażyna Pawlowska, Klaudia Radomska, Piotr Gebara
Keywords
Related Articles
- EP ID EP615510
- DOI 10.5755/j01.ms.25.3.19536
- Views 42
- Downloads 0
Heterogeneous Nucleation Effect of N, N'-Adipic Bis(4-phenylbutyric Acid) Dihydrazide on Crystallization Process of Poly(L-lactic Acid)
Enhancing crystallization ability is a fundamental challenges in Poly(L-lactic acid) (PLLA) industry, therefore, the goal of this work was to synthesis a new organic nucleating agent N, N'-adipic bis(4-phenylbutyric acid...
Optimum Control Parameters During Machining of LM13 Aluminum Alloy Under Dry Electrical Discharge Machining (EDM) With A Modified Tool Design
Dry Electrical Discharge Machining(EDM) is considered as a green manufacturing process in which the liquid dielectric medium is replaced by a high velocity gas, which results improved process stability. A special tool de...
Curing Kinetics and Mechanism Research of E44/T31 Insulation Paint
Epoxy resin insulation paint was prepared with epoxy resin (E44) as binder and with proper inorganic fillers and curing agent (T31) as additives. The isothermal curing reaction process of paint was studied by the differe...
Influence of Graphene Sheet on Microstructure and Properties of Ni-based Alloy Coatings Prepared by Laser Cladding
Ni-based alloy cladding layers with different graphene sheet additions were prepared by laser cladding on the 40CrNi2Si2MoV steel substrate. The influence of the graphene sheet on the microstructure and properties of the...
Effect of Stir Casting Process Parameters on Properties of Aluminium Composites – Taguchi’s Analysis
The need for lightweight materials in various industries, increased fuel price, requirement of improved mechanical, thermal properties leads to the development of aluminium metal matrix composites. Stir casting method is...