Electromechanical Model of Machine for Vibroabrasive Treatment of Machine Parts
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2015, Vol 1, Issue 1
Abstract
A lot of operations on trimming clean and finishing – stripping up treatment, first of all, removing of burrs, rounding and processing of borders, until recently time was carried out by hand, and hardly exposed to automation and became a serious obstacle in subsequent growth of the labor productivity. Machines with free kinematics connection between a tool and the treating parts is provided by the printing-down of all of the surface of the machine parts, that allows us to effectively treat both internal and external surfaces of the machine parts. The analysis of literary sources, patents and charts of methods of the intensification of the processes of vibro abrasive treatment, allowed us to determine the basic directions of development of vibro machines constructions for intensification of the trimming - stripping of the machine parts in a freely granular environment in default of hard kinematic connection between the parts and the tool. The feature of vibro abrasive treatment is a free kinematic connection between a tool and the machine parts, i.e. there exists complication in providing with the stable beforehand set technologically optimum influence of abrasive grains on treated parts under variable parameters of the working chamber of vibroabrasive machine. The purpose of this work is the development of a structural electromechanical model of a vibromachine for adaptive vibroabrasive treatment of the machine parts. To solve this problem, the structural electromechanical model of vibromachine for adaptive vibroabrasive treatment of machine parts was developed. The offered machine is able to provide minimum energy consumption on the vibrodrive of vibroabrasive machine due to providing and maintenance of the permanent resonance mode of operations of working chamber.
Authors and Affiliations
Ruslan Gorbatiyk, Igor Palamarchuk, Roman Chubyk
Keywords
Related Articles
- EP ID EP200626
- DOI -
- Views 131
- Downloads 0
Substantiation of Parameters and Analysis of Operational Characteristics of Oscillating Systems of Vibratory Finishing Machines
The calculation diagrams of oscillating systems and operation features of vibratory finishing machines are considered. The mathematical models of three-mass and four-mass oscillating systems are presented. The amplitude...
Ways of Improvement of Operational Efficiency of Hopper Devices
The operation of hopper devices, which are used in industry, civil engineering, agriculture and transport, is analyzed on the article. The external factors, which influence the process of charging, storing and dischargin...
On Free Oscillations of a Quadratic Nonlinear Oscillator
A free oscillations of a system with one degree of freedom, caused either by the initial deviation from the stable equilibrium position or by the initial velocity provided by the oscillator in this position was considere...
Regulation of the phase-structural composition and metastability of austenite by alloying elements and parameters of tempering for increase wear-resistance of Fe-Cr-Mn deposited steel
It is shown that under the influence of alloying (Cr, Mn, C, Si, Ti, N, V) during electric arc hardfacing with a flux cored wire, as well as technological tempering parameters at temperatures of 300...700°C, the phase-st...
Dynamic Properties Predictions for Laminated Plates by High Order Theories
The main aim of this study is to predict the elastic and damping properties of composite laminated plates. Some approximate methods for the stress state predictions for laminated plates are presented. For simple uniform...