Energy of Substitution of Anions and Cations in Zinc and Cadmium Telluride
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 4
Abstract
Energy substitution of cations and anions in ZnTe i CdTe by atoms from first and seventh group of the periodic table were calculated using the method of bonding orbitals. Based on the results conclusions about the most likely types of defects by doping.
Authors and Affiliations
V. V. Prokopiv, I. V. Horichok, M. S. Pylyponiuk, V. M. Boychuk, G. D. Mаteik, T. M. Mazur
Crystallographic Features of Nanostructures SnTe on Polyimide
It is done the statistical analysis of crystallographic angles of surface elements of tin telluride films deposited on a substrate of polyimide by open evaporation in a vacuum. Analysis of images obtained by atomic force...
Electrophysical Properties of Nanocomposites on the Basis of Polychlorotrifluoroethylene and Magnesium Oxide Modified with Copper Iodide
The electrophysical properties of magnesium oxide chemically modified with copper iodide have been studied in the superfrequency range and low-frequency in the temperature range (25 – 170) оС and a concentration of from...
Features of the Structure of GeX2 (X = S, Se) Chalcogenide Glasses (Review)
This article reviews studies on the structure of chalcogenide glasses obtained from compound GeX2 (X = S, Se). Parameters defining the structure of glassy alloys are usually determined by Fourier transformation of experi...
Features of Synthesis of Complex Oxide Systems by Means of SGA-Method
In this paper studies the mechanisms of complex oxide systems formation obtained by the method of sol-gel autocombustion. It was found that at the mixing of precursors hydrolysis reaction occurring, leading to the format...
The Influence of the Synthesis Temperature on Phase Composition and Structure of Tenary Compounds Obtained from the Powder Mixture of the TiH2-Al-C System
This paper presents results of an investigation of the features of phase and structure formation of a ternary compound during thermal sintering use of compacted TiH2-Al-C powder blends. The thermal sintering was carried...