Enhancement in the Tribological and Mechanical Properties of Electroless Nickel-Nanodiamond Coatings Plated on Iron
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 4
Abstract
A technology to improve the tribological and mechanical surface properties of iron alloys is developed based on the electroless nickel plating. The technology combines sol-gel and electroless deposition technique. Novel nanocomposite coatings are obtained consisting of Nickel-phosphorus-nanodiamond (Ni-P-ND). The ND sol is added directly to the electroless Ni-P solution. A suitable surfactant is added to achieve well-dispersed ND particles in the electroless solution to facilitate their embodiment and equal distribution in the coating. Substrates of steel 17CrNiMo6 and spheroidal graphite cast irons are used for the manufacture of the iron alloys specimens. The surface morphology and microstructure observation performed by scanning electron microscopy (SEM) and optical metallography confirms the influence of ND particles on the coating structure. The structural phase investigation by X Ray analysis indicates a transformation of the amorphous phase to a crystalline one such as Ni, Ni3P after coatings' heat treatment. The microhardness investigation by Knoop Method and wear resistance measurement in accordance with the Polish Standard PN-83/H-04302 of Ni-P and Ni-P-ND composite coatings are evaluated and compared with each other. The increase in the value of hardness and wear resistance of Ni-P composite coatings in the presence of ND particles and after heat treatment is obtained.
Authors and Affiliations
Z . Karaguiozova, J . Kaleicheva, V . Mishev, G . Nikolcheva
Keywords
Related Articles
- EP ID EP245836
- DOI 10.24874/ti.2017.39.04.03
- Views 74
- Downloads 0
Experimental Study of Adhesive Wear of a Holding Device Using a Cross Cylinders Tester
Adhesive wear was identified in a cylinder of a rotating holding device of a forming die system, which permits to hold and align a leaf spring to carry out a punching operation at the automotive industry. To investigate...
Tribological Properties of Silicone Rubber-Based Ceramizable Composites Destined for Wire Covers. Part I. Studies of Block-On-Ring Friction Contact
Ceramizable composites of silicone rubber matrix become more and more popular materials destined for wire covers, what can enhance fire safety of building increasing operation time of important equipment or devices (eg f...
Filtration Systems Design for Universal Oils in Agricultural Tractors
Three filtration systems using the tractor hydraulic circuit were proposed and verified during the tractors operation. Using the tractor-implement hydraulic system and filter body with accessories the universally useful...
Squeezing Film Characteristics for Micropolar Fluid between Porous Parallel Stepped Plates
In this paper, the theoretical study of squeeze film characteristics between porous parallel stepped plates with non-Newtonian micropolar fluid is presented. The lubricant in the film region and also in the porous is mod...
Possibilities of Application of High Pressure Jet Assisted Machining in Hard Turning with Carbide Tools
High Pressure Jet Assisted Machining (HPJAM) in turning is a hybrid machining method in which a high pressure jet of cooling and lubrication fluid, under high pressure (50 MPa), leads to the zone between the cutting tool...