Filtration Systems Design for Universal Oils in Agricultural Tractors
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 4
Abstract
Three filtration systems using the tractor hydraulic circuit were proposed and verified during the tractors operation. Using the tractor-implement hydraulic system and filter body with accessories the universally useful filtration systems were designed. The designed filtration systems are the second stage of universal oil filtration whereas the first stage is the standard tractor filter. The decrease in the content of iron reached the values 25.53 %, 32.95 % and 41.55 % and the average decrease in oil contamination characterized by average value of decrease in content of iron, copper and silicium reached values 24.3 %, 24.7 % and 35.53 % in dependence on the filtration system and an oil contamination level. The decrease in contamination level verified the ability of designed filtration systems for agricultural tractors.
Authors and Affiliations
R. Majdan, Z. Tkáč, K. Kollárová, I. Vitázek, M. Halenár
Keywords
Related Articles
- EP ID EP245870
- DOI 10.24874/ti.2017.39.04.14
- Views 79
- Downloads 0
An Attempt to Calibrate the Laser Induced Fluorescence (LIF) Signal used for Oil Film Thickness (OFT) Measurements in Simulating Test Rigs
The issue of laser induced fluorescence calibration for engine and simulating rigs was studied using both a static calibration rig and a dynamic method involving a modified piston-ring specimen. The technique used to mea...
Effects of Velocity-Slip and Viscosity Variation in Squeeze Film Lubrication of Two Circular Plates
A generalized form of Reynolds equation for two symmetrical surfaces is taken by considering velocity-slip at the bearing surfaces. This equation is applied to study the effects of velocity-slip and viscosity variation f...
Surface Roughness Analysis in High Speed Turning of Ti-6Al-4V Using Coated Carbide Inserts: Experimental and Modeling Studies
Machining and achieving good surface finish in Ti-6Al-4V is a challenging task. Several factors influence surface finish of which some can be controlled and are mainly the machining parameters and some are considered unc...
Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry
In this paper, for the sake of improving the reparatory hard-facing technology is especially analyzed reparatory hard-facing of tools for manufacturing compressed products in confectionary industry. Those products are be...
Effect of Microstructure on the Wear Behavior of Heat Treated SS-304 Stainless Steel
Sliding wear characteristics of some heat treated SS-304 stainless steel against EN-8 steel in dry condition have been studied in the present experimental work. Samples of SS-304 stainless steel have been heated in a muf...