Error of methodical study at measurement of average energy consumption of microcontrollers
Journal Title: Вісник Тернопільського національного технічного університету - Year 2016, Vol 81, Issue 1
Abstract
The article deals with the comprehensive research of methodical error appearing during applying of new measurement method for average energy consumption of microcontrollers whole performing instructions, applications or their fragments. The author revealed that methodical error is rather insignificant, so the method provides high measurement accuracy and performance in terms of error probability.
Authors and Affiliations
Oleksandr Osolinskyy
Keywords
Related Articles
- EP ID EP257505
- DOI -
- Views 64
- Downloads 0
Forced vibrations of piezoceramic cylindrical shells
This paper is devoted to the analysis of the forced vibrations problem for piezoceramic cylindrical shells in the form of short and high rings with radial polarization. Simultaneously a new simple technique for an experi...
Computation of improper integral according to eigen-elements of 1st-genus hankel – (Kontorovych-Lebedev) hybrid differential operator – 2nd genus Legendre 2nd genus – Fourier on polar axis
There were calculated using comparison method of solving the boundary problem on the polar axis segment with three junction points for the separate system consisting of Hankel, Kontorovich-Lebedev, Legendre and Fourier d...
Bending of the plate with a crack in presence of plastic zones at its tops
A problem of biaxial bending under distributed bending moments at infinity of isotropic plate with the straight crack and the presence at its tops of plastic zones where Trasck’s plasticity conditions are performed as a...
Corrosion fetigue features of carbon 35 (0.35c) steel in presence of oak chips extract
It is established that corrosion protection efficiency of medium carbon steel in water inhibited by oak chip extract grows with increasing of inhibitor concentration. The degree of corrosion protection reaches 85 – 97% u...
Computer modelling characteristics of ballast choke of the fluorescent lamp
Basing on the analysis of existing structures of the planar system induction coils authors proposed to fill the space between the turns of the coil by the ferromagnetic material. This design will increase the magnetic in...