Evaluating Lubrication Capability of Soybean Oil with Nano Carbon Additive
Journal Title: Tribology in Industry - Year 2018, Vol 40, Issue 1
Abstract
This paper presents the influence of adding black carbon nanopowder (average size 13 nm, PlasmaChem) in soybean oil in different massic concentration (0.25 %, 0.50 % and 1 %) on several tribological parameters: friction coefficient and wear scar diameter. Tests are done on a four-ball machine. The test parameters were load: 100 N, 200 N and 300 N and speed 1000 rpm, 1400 rpm, 1800 rpm. The test balls are lime polished, made of chrome alloyed steel, having 12.7±0.0005 mm in diameter, with 64-66 HRC hardness. The sample oil volume required for each test was 8±1 ml. This type of anti-wear additive, because the particle distribution is not evenly in contact during the running, could not help improving the tribological behavior. It does not reduced the friction coefficient and wear scar diameter as compared to the neat soybean oil. The authors estimate that the additive should be bonded (physically or chemically) on the triboelements for having better results.
Authors and Affiliations
G. C. Cristea, C. Dima, C . Georgescu, D. Dima, L . Deleanu, L. C. Solea
Experimental Research Using of MQL in Metal Cutting
In this paper an effect of using of minimal quantity lubrication (MQL) technique in turning operations is presented. Experimental research was performed on carbon steel C45E. Technological parameters: depth of cut, feed...
The Accelerated Aging Effect of Salt Water on Lignocellulosic Fibre Reinforced Composites
In recent years natural fibre reinforced composite materials have received an increasing attention in consideration of their biodegradability and admirable mechanical properties. The present paper reveals the experimenta...
Influence of Composition of Plant Oils on Their Tribological Properties
Sunflower, corn, rapeseed, olive, and linseed oils were used for investiga-tion. Their fatty-acid compositions have been evaluated by gas chroma-tography. The tribological properties were determined with a four-ball mach...
Frictional Study of Al 6061 Red-Mud Composite under the Influence of Different Process Parameters
Metal matrix composite having aluminium 6061 as matrix incorporating red mud reinforcement has been casted by employing stir casting. Scanning electron microscopy images has been taken to observe the uniformity of the re...
Slew Bearings Damage Detection using Hilbert Huang Transformation and Acoustic Methods
Slow speed slew bearings are widely used in many applications such us radar, aviation and aerospace units, bogie bearings for vehicles, harbor and shipyard cranes. Slew bearings are design to carry out high axial and rad...