Evaluation of Current Control Methods in Three-Phase Shunt Active Power Filters System
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 3
Abstract
This paper aims the implementation of the control techniques for shunt power active filters and the achievement of a comparative study regarding the performance achieved by these techniques both in simulation and on an experimental active filter. The experimental active filter is using the dSpace DS1103 DSP board for the control section so different methods for the compensating current computation as well as for the DC-Link voltage and output current control can be investigated.
Authors and Affiliations
Constantin Vlad Suru, Mihaita Linca, Cristina Alexandra Patrascu
Keywords
Related Articles
- EP ID EP461623
- DOI -
- Views 90
- Downloads 0
Connection in Joints for Thin-Walled Steel Sections and Sheeting
Thin-walled cold-formed members are thin, this will give rise to behavioral phenomena, which are not usually encountered in the more familiar hot-rolled sections. When compared to hot-rolled steel sections, cold-formed t...
Influence of the Fusing Process on the Wear and Corrosion Properties of NiCrBSi-Coatings
In this study the NiCrBSi feedstock powder was deposited by flame spraying on to C45 steel substrate. After spraying the coated material was differently fused at 1000°C. The microstructure evolution respectively the phas...
Hot Water Recirculation and Control, a Solution to Reduce Energy Consumption
For the energy consumption reduction in the buildings sector, EU pro-poses guidelines regarding energy performance. EU Member States must take measures to ensure the conversion of buildings into nearly zero energy buildi...
HydroHillChart – Francis module. Software used to Calculate the Hill Chart of the Francis Hydraulic Turbines
The paper presents the Hydro Hill Chart - Francis module application, used to calculate the hill chart of the Pelton, Francis and Kaplan hydraulic turbine models, by processing the data measured on the stand. After de-sc...
The Use of Current Generators in Electrical Converter Drives for Stepper Motors
This paper presents some ways to realize electrical converters for step-per motor drives. The first part analyzes aspects for unipolar stepper motor and use of constant current generators. The second part present current...