Evaluation of gas separator effect on operability of gas-motor piston compressor valves
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 5, Issue 1
Abstract
<p>To increase the efficiency of gas-lift oil and gas production, it is necessary to improve the operation of compressor stations, namely, to increase the reliability of the gas-motor piston compressor units installed in them. It is found that one of the vulnerable units affecting the reliability and efficiency of the gas-motor piston compressor are direct-flow self-acting valves.</p><p>In the process of preparing gas for transportation, as well as to ensure the reliability and efficiency of the entire production process, it is necessary to eliminate all gas leaks, prevent liquid hydrocarbon components and solids from entering the valve plates.</p><p>To solve this problem, associated petroleum gas must be cleaned from solids, heavy hydrocarbon components and moisture. To this end, it is recommended to install an additional new design horizontal gas separator on the suction line of gas-motor piston compressors.</p><p>The usefulness and importance of the new gas separator lie in a more efficient cleaning of associated petroleum gas supplied to the suction of the 1st stage compressor cylinders, which improves compressor performance, minimizing the leakage of valve plates.</p><p>The new design separator is used to clean gas from coarse and fine-grained dropping liquid, partially liquid in the vapor-phase state and solids. The new separator can also be used in various sectors of the oil and gas industry.</p>The purpose of installing a new gas separator is to increase the efficiency of gas cleaning from liquid and solid impurities
Authors and Affiliations
Natig Seyidahmadov
Keywords
Related Articles
- EP ID EP664139
- DOI 10.15587/1729-4061.2019.179373
- Views 70
- Downloads 0
Utilization of the prepyrolyzed technical hydrolysis lignin as a fuel for iron ore sintering
<p>A promising direction of technical hydrolysis lignin utilization is metallurgical production, primarily iron ore preparation and blast furnace process. A significant potential is concentrated in the sintering process....
Research of a microwave radiometer for monitoring of internal temperature of biological tissues
<p>Currently, there is growing interest among specialists in the use of non-invasive dose-free technologies for diagnosis and monitoring treatment of various diseases. Microwave radiometry enables non-invasive detection...
Study of the lamb waves propagation along a plate in contact with a randomly inhomogeneous heterogeneous medium
<p>We present results of research into the influence of characteristics of a heterogeneous medium on the Lamb wave propagation process parameters along a plate in contact with a given medium. A mathematical description o...
Design and study of the energyefficient unified apparatuses for energytechnological manufacturing
<p>The improved industrial sample of the rotor-pulse heat generator (RPH), integrated into the thermal heating systems of industrial buildings, was produced. Rotor-pulse generators do not occupy significant positions in...
Study of the method for assessing atmospheric turbulence by the envelope of sodar signals
<p class="a">The method for measuring the intensity of atmospheric turbulence based on assessment of statistical characteristics of the sodar signal envelope was investigated. This method requires no changes to the sodar...