Evaluation of Physical Properties of Clays Mixed with Silica Sand
Journal Title: Jurnal Kejuruteraan - Year 2014, Vol 26, Issue 1
Abstract
This study examined the effects of heat treatment on two types of clays mixed with silica sand under laboratory conditions. Soils were subjected to three varied temperatures, i.e. 100, 250 and 500°C. The soil properties studied were Atterberg’s limits, optimum water content and unconfined compressive strength. Experimental results showed that the temperature greater than 100°C resulted in a reduction in Atterberg’s limits, optimum water content and unconfined compressive strength. For illite and silica mixture heating the soils at 500°C, liquid limit, plastic limit, optimum water content and unconfined compressive strength were reduced to 12%, 0%, 40% and 0%, and for kaolinite and silica mixture the above characteristics reduced to 18%, 0%, 50% and 0% respectively when matched to soil specimen’s properties at ambient temperature. Whereas maximum dry density for illite and kaolinite increased by 5% and 8% respectively for the two clays.
Authors and Affiliations
A. Akbar Firoozi, M. R. Taha . , Asghar Firoozi, Tanveer A. Khan
Kajian Model Penukaran Kadar Hujan untuk Integrasi Masa 60 Minit kepada 1 Minit di Malaysia (Study on Rainrate Conversion Models for 60 Minutes to 1 Minute Integration Times in Malaysia)
The rapid development of wireless communication technologies has led the frequency band reach its saturated level, particularly in developed countries. This has drawn the attention of telecommunication systems engineer t...
Flow Behavior of 1.4841 Steel in Hot Compression Process
Hot compression experiments using a dilatometer were carried out in order to study the effects of hot compression parameters on the flow behaviour of 1.4841 steel. Specifically, the effects of the strain rate and the def...
Developing and Validating a Simulation Model for Counting and Classification of Vehicles
An algorithm system approach has been presented for extracting traffic data using video image processing. While an offline program focuses on extracting vehicles, tracking them and provides the vehicle count for a short...
Sistem Dapatan Semula Imej untuk Aplikasi Perubatan (Content-based Image Retrieval for Medical Application)
Dapatan semula imej (DSI) adalah sistem pencarian imej yang menggunakan ciri-ciri tertentu atau konteks khusus dalam sesuatu imej. Dalam bidang perubatan, sistem DSI digunakan untuk menyediakan imej yang diperlukan secar...
Heat Transfer Enhancement of Laminar Flow in a Circular Tube Using Swirl/Vortex Generator
Swirl/vortex fl ow generator is an important form of passive augmentation techniques consist of a variety of tube inserts, geometrically varied fl ow arrangements and duct geometry modifications that produce flows. Twist...