EVALUATION OF SELECTED PROPERTIES OF A SURFACE LAYER AFTER MILLING USING INSERTS WITH DIFFERENT COATINGS
Journal Title: Tribologia - Year 2017, Vol 272, Issue 2
Abstract
The article presents a comparison of results of measurements of the geometrical structure of milled surfaces with inserts with different coatings. The study was done on a vertical milling centre. The first step was to determine the properties of milled surfaces using new inserts. For this purpose, an optical apparatus was used. The samples were then subjected to continuous treatment. Upon completion of the declared quantities of machining cycles, these surfaces were analysed. This allowed us to determine the influence of the coating of the inserts on the surface layer of milled surfaces continuously.<br/><br/>
Authors and Affiliations
Piotr MAJ, Edward MIKO
Keywords
Related Articles
- EP ID EP240858
- DOI 10.5604/01.3001.0010.6318
- Views 75
- Downloads 0
SEARCH FOR THE MOST USEFUL GEOMETRY OF AN ACOUSTIC JOURNAL BEARING
Computer simulations of a number of journal bearing’s geometries utilising acoustic levitation were carried out. The choice of the best geometry depended on the ability of a deformed shape, created by piezo-electric elem...
TRIBOLOGICAL TESTS AND IMPACT TESTS OF ACRYLIC POLYMERS FOR DENTAL PROSTHETICS
The clinical functionality of the prosthesis structure consists of creating the most convenient conditions without any traumatic effects of chewing forces on the substrate and adapting it to the individual biomechanical...
THE EFFECT OF MAGNETIC PARTICLE CONCENTRATION ON THE FERROFLUID LUBRICITY
The subject of the author’s research, whose results are presented in this article, are the chosen properties of ferrofluid. The author assumes that the concentration of magnetic particles in ferrofluid may significantly...
ADHESION AND COHESION FORCES OCCURRING IN PARABOLICAL MICROBEARINGS
This paper presents the influence of adhesion and cohesion forces on the pressure distribution and carrying capacity forces occurring during the lubrication of hydrodynamic, parabolic sidle microbearings. We are consider...
THE POSSIBILITIES OF STRENGTHENING OF THE SURFACE LAYER OF NODULAR IRON BY LASER ALLOYING WITH SILICON NITRIDE ON THE EXAMPLE OF A ROCKER ARM
In the order to increase the resistance to the friction wear of machine parts appropriate surface treatment application is needed. The aim of presented research was to evaluate the laser alloying with silicon nitride eff...