Evaluation of Sewed Thread Consumption of Jean Trousers Using Neural Network and Regression Methods
Journal Title: Fibres and Textiles in Eastern Europe - Year 2015, Vol 23, Issue 3
Abstract
This paper deals with the prediction of the sewing thread consumption of jean trousers using the neural network technique. The neural network results and analysis are discussed and investigated. Indeed the findings show that neural network consumption values give better fitting of experimental results than the ones obtained using regression technique. However, compared to the experimental consumption results, theoretical ones of the sewn jean pants seem widely predictable in the desired field of interest. Among the all parameters studied, statistical analysis results also indicate that five inputs can be considered as influential ones. When classifying these five influential inputs, only three parameters are considered most significant. In fact the thread consumed to sew jean trouser samples remains influenced especially by the thread properties and needle fineness as well. Compared with the regression model, the neural network model gives a more accurate prediction and to a great extent provides the amount of sewing thread.
Authors and Affiliations
Boubaker Jaouachi, F. Khedher
Keywords
Related Articles
- EP ID EP68978
- DOI -
- Views 110
- Downloads 0
Device for Measurement of Static and Dynamic Air Permeability and Deformation Changes in Textile Materials
This article investigates the measuring of the air permeability of textiles. A new instrument designed to measure the air permeability of textiles is described in the article. The instrument differs from the standard dev...
Novel Colour Clustering Method for Interlaced Multi-colored Dyed Yarn Woven Fabrics
In this paper, a novel colour clustering method based on the K-means clustering algorithm is developed for interlaced multi-coloured dyed yarn woven fabrics which can be used to sort the colour of the dyed yarn for the d...
Optimisation of Multi-Response Surface Parameters of the Roving Twist Factor and Spinning Back Zone Draft
In order to obtain the optimal collocation of two important technological parameters in the spinning process, the multi-response surface method was used to optimise the experimental results. Through the orthogonal design...
Effects of Resin Treatments on the Quality of Cotton Fabric Dyed with Reactive Dye
In this study, we analysed different resin finishing agents on cotton fabric dyed with reactive dye. Different tests were carried out on the resin treated fabric, such as the wrinkle recovery, tensile strength, dimension...
Investigation into the Dielectric Properties of Polypyrrole Coated Fabrics Composites
Flexible polypyrrole coated fabric composites with good dielectric properties were produced using pyrrole as a monomer by in-situ polymerisation on polyester fabric. Initially, the influence of the pyrrole concentration,...