Investigation of the Efficiency of the UV/H2O2 Process on the Removal of dye Acid Green 16 from Aqueous Solutions: Process Optimization and Toxicity Assessment
Journal Title: Fibres and Textiles in Eastern Europe - Year 2017, Vol 25, Issue 6
Abstract
The effects of the removal of Acid Green 16 (100 mg AG-16/dm3, COD=111 mg O2/dm3) from aqueous solutions by the UV/H2O2 process in UV reactors: low pressure lamp (LP, 15W) and medium pressure lamps (MP, 150W) are presented. The best results of AG-16 removal were obtained for H2O2 250 mg/dm3 (99.85%, AG-16=0.15 mg/dm3) and 200 mg/dm3 (99.80%, AG-16=0.20 mg/dm3) for LP and MP lamps, respectively, with the same parameters, i.e. 30 min reaction time and pH 6. Under these conditions, the AG-16 solution was completely discolored and the COD removal efficiency was 57.3% (LP lamp) and 63,4% (MP lamp). However, at optimum conditions of decolorisation, no decrease in the toxicity of solutions (Microtox test) was observed. For the MP lamp, the toxicity of solutions remained at the same level as in the initial solutions (Toxicity Unit, TU=3), whereas in the case of the LP lamp, the TU value after the process increased to 6. In conclusion, the AOPs for toxic pollutants should also be optimised from the point of view of toxicity.
Authors and Affiliations
Izabela Płonka, Barbara Pieczykolan, Krzysztof Barbusiński, Joanna Kalka, Maciej Thomas, Paweł Jan Piskorz
Ballistic Behaviour of PACVD-Modified Textiles
A comprehensive study was performed using the Plasma Assisted Chemical Vapour Deposition (PACVD) modification of ultrahigh molecular weight polyethylene (UHMWPE) fibrous composites and paramid fabrics with the deposition...
Hydrofobowe preparacje anytgnieceniowe tkanin jedwabnych z niewielkim udziałem formaldehydu
Opracowano antygnieceniową preparację tkanin jedwabnych z niewielkim udziałem formaledehydu oraz trzech komercyjnych preparatów sieciujących. Stężenie tych preparatów badano biorąc pod uwagę uzyskiwany kąt odprężalności,...
Laboratory Study of Soil Shear Strength Improvement with Polyester Fibres
sdsd<br/><br/>
Otrzymywanie termowrażliwych poliuretanów na bazie zmodyfikowanego oleju rycynowego
W pracy otrzymano termowrażliwe poliuretany (TSPU) z glikolu politetrahydrofuranowego (PTMG), glikolu polietylenowego (PEG) i bezwodnika maleinowego zmodyfikowanego olejem rycynowym (MCO). Za pomocą SEM, DSC i WAXD zbada...
Badanie zależności pomiędzy liczbą i pozycją splotów nabieranych i wytrzymałością dzianin wykonanych na szydełkarce cylindrycznej
Zagadnienie tłumienia hałasu uzyskuje coraz większe znaczenie w badaniach naukowych, technologicznych i zagadnieniach ogólnych ponieważ poziom dźwięku określa jakość ludzkiej egzystencji i dlatego izolacja akustyczna jes...