EVALUATION OF THE PROPERTIES OF DIAMOND-LIKE CARBON COATINGS LUBRICATED WITH IONIC LIQUIDS
Journal Title: Tribologia - Year 2017, Vol 275, Issue 5
Abstract
The purpose of the study was to evaluate the properties of DLC coatings with ionic liquids used as lubricants. The type a-C: H DLC coatings were deposited onto the 100Cr6 steel substrate by PVD. The surface topography of the DLC coatings was studied with a Bruker's Dimension Icon® Atomic Force Microscope (AFM), and surface morphology testing, cross section and chemical composition analyses were performed using the Jeol JSM-7100F scanning electron microscope, equipped with an EDS microanalyzer. Surface geometry measurements prior to and after tribological tests were performed on a Taylor Hobson's Talysurf CCI contactless optical profilometer. The tribological tests were carried out on an Anton Paar TRB tribotester under technically dry and lubricated friction with an ionic liquid, 1-Butyl-3-methylimidazolium tetrafluoroborate. The results show that DLC coatings and ionic liquids can significantly reduce resistance to motion.
Authors and Affiliations
Krystian MILEWSKI, Monika MADEJ, Magdalena NIEMCZEWSKA-WÓJCIK, Dariusz OZIMINA
TESTING THE STRUCTURE AND PROPERTIES OF STEELS AFTER HARDFACING AND LASER TREATMENT
This paper analyses the structure, hardness, and frictional wear resistance of surface layers formed on steels after hardfacing by means of the SSA arc method with self-shielded flux cored welding wire, with a content of...
Tribological properties of thixotropic lubricants
THE INFLUENCE OF A CONSTANT STATE OF DEFORMATION ON THE FRICTION COEFFICIENT IN SELECTED THERMOPLASTICS (POLYMER–STEEL PAIR)
The effect of tensile deformation on polymer structures and their mechanical properties is described in various papers. However, the majority of articles are focused on high deformation (a few hundred percentiles) at inc...
TEMPERATURE OF PLOUGHSHARE MATERIAL IN THE COURSE OF PLOUGHING
The change of temperature of subsurface layer material of ploughshare, occurring in the course of fine sandy loam (8% moisture and temperature 15.3°C) cultivation, done with bed making plough, was determined. Measuring s...
TRIBOLOGICAL ASPECTS OF MATERIAL SELECTION FOR INTEVERTEBRAL DISC IMPLANT
Total disc replacement is a relatively new treatment procedure of patients with chronic back pain. Regardless of the choice of materials from which the disc components are made, the most important factor limiting their s...