Evolution Study of Crystal Parameter for Iron Powder Subjected to Mechanical Milling
Journal Title: Leonardo Electronic Journal of Practices and Technologies - Year 2003, Vol 2, Issue 2
Abstract
In a planetary mill with balls of high energy, the experiences of milling on different time interval of iron powder were done. The iron powder with 99.9% purity was introduced in four vials, having every one on average mass of 1.750 kg, varying the number and diameter of balls. It was noticed, there is a tendency to increase accentuated the crystallographic parameter in the interval of 7.5-9 mm ball radius, it is admitted the same interval to be more efficiently on milling from point of view of evolution of crystal parameter from experimental data.
Authors and Affiliations
Ioan TĂUT, George ARGHIR
Keywords
Related Articles
- EP ID EP123631
- DOI -
- Views 49
- Downloads 0
Post-treatment of Produced Water Before Discharge Using Luffa Cylindrica
Sponge-gourds, the fruit of Luffa cylindrica, are widely used throughout the world. It is an annual climbing crop which produces fruit containing fibrous vascular system. Produced water is any water that is present in a...
Effect of Some Process Variables on Nickel Electroplating of Low Carbon Steel
This research work investigated the effect of current density, bath concentration, bath solution volume and electroplating time on nickel electroplating of low carbon steel. Varying voltage between 0.3 and 0.8 V, bath co...
Analysis and Development of Models for Liquid Effluent from Textile Industry
The technology of transforming cotton and synthetic fibres into fabrics and dyed fabrics generates various kinds of effluent. The influence of effluents on water reserve depends on the physico-chemical properties of the...
Fantasmagoric Fulleroids Revisited
New strange fulleroids are built up by using the three classical composite map operations: tripling (leapfrog Le), quadrupling (chamfering Q) and septupling (capra Ca) on the starting structure dodecahedron. These transf...
Quality Changes in Dried Tomatoes Stored in Sealed Polythene and Open Storage Systems
Studies were conducted to quantify the changes in quality attributes of dried tomatoes during storage using High Density Polythene Film (HDPF) and normal (traditional) open storage systems. 300g of the dried tomato fruit...