Exhaust gas recirculation (egr) – effective way to reduce NOx emissions
Journal Title: Journal of Mechanical Engineering and Biomechanics - Year 2016, Vol 1, Issue 2
Abstract
This paper gives insight into usage of water cooled Exhaust Gas Recirculation (EGR) for a twin cylinder direct injection compression ignition engine to reduce oxides of nitrogen (NOx) emission from engine exhaust. Different rates of EGR from 5% to 20% in step of 5% are used for varying loads from 25% to 100% in step 25% each. From the experimental investigation it is concluded that usage of EGR will decrease NOx formation inside the combustion chamber and it decreases with increase of EGR rates and Loads. The maximum reduction is around 80% for full Load condition at 20%EGR rate when compared against without EGR condition.
Authors and Affiliations
Parashuram Bedar, Kumar G N
Keywords
Related Articles
- EP ID EP182938
- DOI -
- Views 83
- Downloads 0
Assessment of different drill diameter on bone drilling
Drilling is a highly demanding machining process due to drill bit geometries complexity and the progressive material failure on the workpiece. When applied to living tissues the process assumes greater attention to ensur...
Exhaust gas recirculation (egr) – effective way to reduce NOx emissions
This paper gives insight into usage of water cooled Exhaust Gas Recirculation (EGR) for a twin cylinder direct injection compression ignition engine to reduce oxides of nitrogen (NOx) emission from engine exhaust. Differ...
Varied effects of shear correction on thermal vibration of Functionally Graded Material plates
The varied shear correction coefficient and the first-order shear deformation theory (FSDT) effects on the functionally graded material (FGM) thick plates under thermal vibration are investigated by using the generalized...
A Survey in the Different Designs and Control Systems of Powered Exoskeleton for Lower Extremities
In this paper, previous studies in powered exoskeleton and their contributions in the field of robotics technology are presented, together with their corresponding control system. Specific problems and issues that were e...
Effect of internal heat generation and injection through one side of a long vertical channel embedded in porous medium with transpiration cooling
This paper deals with Effect of Internal heat generation and injection through one side of a long vertical channel embedded in porous medium with transpiration cooling. The non linear partial differential equations gover...