EXPERIENCE GAINED DURING EXAMINATION OF ELECTROMAGNETIC COMPATIBILITY BETWEEN ROLLING STOCK AND AXLE COUNTERS
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 179, Issue 13
Abstract
Axle counters are more and more often applied in train detection systems. The wheel sensor is a main part of each axle counter system. In parallel, more and more complex railway vehicles, especially traction ones, are a potential source of interferences influencing the operation of these train detection systems. It is the reason to verify the electromagnetic compatibility (EMC) between the signalling equipment, particularly train detection systems and new vehicles in the process of obtaining the permission for their exploitation. The measurement of interfering magnetic fields generated by vehicles is one of tests to be carried out. For the simplification and unification purpose of the applied interference test methods the EN 50238 standard and TS 50238-3 technical specification were developed. The specification defines unified testing procedures. However, it is necessary to verify if it may replace different testing methods used in particular European states. It is the goal of the European research project financed from the TEN-T network resources. This project is part of the larger project of facilitation and speeding up the ERTMS system deployment. One of nine measurement campaigns planned in the frame of this project was conducted in Poland by Railway Research Institute.
Authors and Affiliations
Andrzej Białoń, Łukasz Zawadka, Dominik Adamski
Keywords
Related Articles
- EP ID EP415290
- DOI 10.18664/1994-7852.179.2018.147732
- Views 80
- Downloads 0
CONSIDERATION OF THE EFFECT OF THE CROSS-SECTION SHAPE ON THE BEARING CAPACITY OF INCLINED SECTIONS IN DESIGN STANDARDS
It isn't enough concrete data on influence of a form of cross section on the bearing ability of elements. As a rule, the models of sections are already idealized previously on the basis of the available dependences estab...
STUDY OF COMPREHENSIVE CHEMICAL ADDITIVES, PROVIDING A PERMEABLE ACTION ON PHYSICAL AND MECHANICAL PROPERTIES REPAIR COMPOSITION BASED BINDER SHLAKOLUZHNOHO
The article is devoted to the substantiation of the non-cement composition of penetrating action on the basis of blast furnace granulated slag and sodium silicate. The results of the investigation of the influence of the...
ADAPTIVE BAYESIAN MODELS FOR EVALUATING THE INDICATORS OF THE RELIABILITY OF FREIGHT CARS ON THE STAGES OF THE LIFE CYCLE
The article discusses the rationale for the application of the Bayesian model (BM) for calculating the reliability indicators of a freight car at the stages of its life cycle. The life cycle includes such stages as the c...
IMPROVING THE TECHNOLOGY OF PROCESSING PASSENGER TRAINS IN THE CONDITIONS OF FUNCTIONING OF SPEED MOVEMENT
Reducing the time of passengers' stay in the road and the possibility of regulating the time of departure and arrival of the train decides the introduction of high-speed passenger traffic on the railways of Ukraine. This...
FEATURES OF THE INTERACTION OF THE TRACK AND THE ROLLING STOCK WITH THE PRESENCE OF INITIAL ROUGHNESS ON THE SURFACE OF THE ROLLING OF RAILS
The article deals with issues related to the interaction of the railway track and rolling stock. In particular, as a computational scheme of the railway track, it is proposed to use a scheme in which the rails are suppor...