FEATURES OF THE INTERACTION OF THE TRACK AND THE ROLLING STOCK WITH THE PRESENCE OF INITIAL ROUGHNESS ON THE SURFACE OF THE ROLLING OF RAILS
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 178, Issue 12
Abstract
The article deals with issues related to the interaction of the railway track and rolling stock. In particular, as a computational scheme of the railway track, it is proposed to use a scheme in which the rails are supported by separate supports that have nonlinear elastic-dissipative characteristics, which, according to the authors, most accurately describes the power processes in the "carriage-track" system. Since the originally proposed design scheme was supposed to be used for operational conditions of railways of industrial transport, its preliminary adaptation was carried out, taking into account the structural features of the rolling stock of the main railway lines of "Ukrzaliznytsya". Based on the prospects for introducing high-speed traffic in certain sections of the regional branches of "Ukrzaliznytsya", in addition to the main factors affecting the overall stress state of the railway track, the initial roughnesses on the rolling surface of rails are introduced into the calculation models. The comparative analysis of the requirements for the straightness of rails of domestic and foreign production, showed significant differences, both in terms of the tolerances allowed, and in approaches to controlling this indicator. This allowed, modeling the most unsuccessful combinations of irregularities along the entire length, as well as at the end sections, to carry out multivariate calculations to determine the vertical forces, depending on the magnitude of the initial unevenness on the rolling surface of the rails. The rails of domestic production and foreign were taken as settlement ones. The results of the calculations show the undoubted influence of the magnitude of the factory roughness on the surface of the rolling of rails on the level of vertical forces. The level of these forces is higher (with other things being equal) on the rails of Ukrainian production.
Authors and Affiliations
Alexander Darenskiy, Vladimir Vitolberg, Dmitry Potapov, Pavlo Storchay, Dmitro Dudikov
Keywords
Related Articles
- EP ID EP381196
- DOI 10.18664/1994-7852. 178.2018.138960
- Views 58
- Downloads 0
ANALYSIS OF THE CONDITION OF RAILS DURING OPERATION
The causes of the failure of rails, the defects that are emerge consequently and their location are considered in the article. The distribution of the decarburized layer along the perimeter and length of the rail is inve...
USING THE METHOD OF FINITE ELEMENTS FOR DETERMINING THE STRESSED-DEFORMED STATE OF ELEMENTS OF THE RAILWAY TRACK
The main principles of the construction and operation of the software complex for estimating the stress-strain state of structural elements of the upper structure of the track under the influence of spatial forces from t...
ESTIMATION OF THE STRESS-DEFORMED STATE OF GROUND, POLLUTED BY PEROXIC ACID
Existing norms regulate only design rules for swelling soils, but do not provide an opportunity to predict the further behavior of the substrate in the case of chemical contamination. In addition, the process of behavior...
FEATURES OF DIAGNOSTIC CHARACTER APPEARANCE REGARDING THE TECHNICAL CONDITIONS OF REDUCTION GEAR FOR PASSENGER CAR
The article to determine the technical condition of reduction gear passenger wagons the mathematical model of vibration that allows to detect the early stages of the birth defects. Using a mathematical model for the cont...
DETERMINATION OF THE STRUCTURE OF CONSTRUCTION WORKS ON THE RECONSTRUCTION OF SEPARATE STATIONS WHEN INTRODUCING A HIGH SPEED MOVEMENT
For a successful integration into the world community of transport Ukraine should be among the countries with the existing highways, which requires to continue relevant research, which started in the late 60-ies of the l...