Experimental Equation of Deformation Behaviour of a Concrete Steel
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
The plastic deformation behavior is defined by the function of the deformation strength according to the strain, strain rate and temperature as the factor of the deformation process. The behavior law establishes by the experimental way, using the torsion test method. The paper shows the results of the researches for establishing of the equation of deformation behavior of steel destined of rolled wires for reinforced concrete.
Authors and Affiliations
Nicolae CĂNĂNĂU, Gheorghe GURĂU, Petrică ALEXANDRU
Thermomechanical Process Simulation to Predict Processing of Mechanical Properties of Alloys Al-Zn-Mg-Cu
This paper presents how to perform simulation (prediction) mechanical properties of aluminum alloys of the system Al-Zn-Mg-Cu. Graphical interface that can predict the mechanical properties studied was performed using MA...
Behavior of Rp3-High Speed Steel on Short Time Nitriding in Fluidized Bed
For steel nitriding, treatment time is a important factor. Gas and plasma nitriding are usual method to increase surface properties by nitriding. A close retort is used. Total time for treatment are higher because are ne...
Effect of Oxidation on Spectrophotometric and Rheological Parameters of Corn Oil
The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate and the analysis of the transmittance spectra of the oxidized corn oil. Corn oil was oxidized of the temperatures of 100°...
Some Aspects about the Refractory Lining Wear in Furnaces
For melting cast iron, carbon steel, copper and copper alloys the quartzite is still one of the most used lining material and the most cost effective as well. The silica lining has to be replaced frequently due to the we...
Research on Obtaining and Characterization of Polymeric Membranes for Wastewater Treatment
Some of the most common polymeric membranes are used in wastewater treatment. Over the years, these membranes have been studied from different points of view: their aim to improve the retention of impurities, membrane af...