Thermomechanical Process Simulation to Predict Processing of Mechanical Properties of Alloys Al-Zn-Mg-Cu
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 3
Abstract
This paper presents how to perform simulation (prediction) mechanical properties of aluminum alloys of the system Al-Zn-Mg-Cu. Graphical interface that can predict the mechanical properties studied was performed using MATLAB software version 6.5 based on mathematical equations mathematical models obtained by the mathematical modeling of thermomechanical treatment process studied. This GUI can be established before the thermomechanical treatment parameters to achieve a favorable complex mechanical properties.
Authors and Affiliations
Marian-Iulian NEACȘU, Elisabeta VASILESCU, Doru HANGANU
Keywords
Related Articles
- EP ID EP596100
- DOI -
- Views 65
- Downloads 0
Influence of Alloying Elements on Corrosion Resistance of Some Iron - Based Sintered P/M Alloys
In this paper is described the influence of alloying elements on corrosion behavior of sintered iron parts. The compacts were sintered at 1,150 °C and the sintering time was 60 minutes. After microstructural studies, the...
Mathematical Modeling of Thermomechanical Treatment Process Applied to Aluminum Base Alloys for Aeronautics
To optimize the thermo-mechanical processing of aluminum base alloys, mathematical modeling was used in a laborious research program by planned experiment of thermomechanical treatment process applied to an Al-Zn system...
Deposition Technologies for Obtaining Thin Films with Special Properties
The properties of metallic materials can be improved by deposition of materials. The coating has a tear strength and better hydro-abrasive corrosion. The thin layer deposition has a thickness of less than 10 micrometers....
Studies on the Effects of Olive Oil Oxidation
The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate and the analysis of the transmittance spectra of the oxidized olive oil. Oxidation of olive oil is a process that leads t...
The Influence of the Temperature Regime on the Mechanical Properties of the Thick Steel Sheets from Carbon and Low-Alloy Steels, Laminated to Thicknesses Less than 40 mm
Steel remains the most used material in the machinery industry, the construction of oil and gas pipelines, etc. Hot rolling is no longer a simple means of obtaining the final geometry of products in the steel industry, b...