Influence of Alloying Elements on Corrosion Resistance of Some Iron - Based Sintered P/M Alloys
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 1
Abstract
In this paper is described the influence of alloying elements on corrosion behavior of sintered iron parts. The compacts were sintered at 1,150 °C and the sintering time was 60 minutes. After microstructural studies, the electrochemical tests were carried out. The corrosion behavior of samples was evaluated using potentiodinamic polarization technique in 3.5% NaCl solution. Different parameters like icorr, cathodic (βc) and anodic (βa) slopes derived after the extrapolation of the Tafel plots were obtained. The results reveal that the alloying elements can improve significantly corrosion resistance of iron based sintered P/M alloys.
Authors and Affiliations
Florentina POTECAŞU, Mihaela MARIN, Octavian POTECAŞU, Tamara RADU, Gina Genoveva ISTRATE
Keywords
Related Articles
- EP ID EP582223
- DOI -
- Views 92
- Downloads 0
Surface hardening for 38MoCrAl09 steel using fluidized bed nitriding
The paper is based an nitriding experiments made in a fluidized bed laboratory furnace. Fluidization was obtained in a steel refractory retort by solid granular (burned fire clay) and fluid (mixture of ammonia and nitrog...
Evaluation of the Sonic System Efficiency for Raw Water Treatment
Water pollution is defined as the change in the water composition that is harmful to human health, unsuitable for economic use or reactive and that can cause damage to the aquatic flora and fauna. In the appreciation of...
Research on the Influence of the Complementary Phase Percentage on the Properties of Copper - Based Composites
The article presents the method to obtain copper matrix composite with CuAl-Fe alloy particles as complementary phase. The samples were obtained by powder metallurgy methods using different percentages of complementary p...
Cu-Ag-Rear Metals for Wires: Processing and Characterisation
Cu based alloy microalloyed with rear metals (RM) (in our case, sample with Nb) for wires were prepared by two different techniques arc-melting and mechanical alloying. Microstructure characterisation was carried out by...
Study on the Use of Oxygen-Enriched Combustion Air at the Ignition Initiator Furnace from the Agglomeration Machine
Comparative study on the use of oxygen-enriched combustion air at the homogenization coal ignition coil from Dwight-Lloyd agglomeration No 5 from the ArcelorMittal Galati metallurgic plant to reduce fuel consumption, inc...