Experimental Investigation of Pressure Drop Characteristics in A Square Channel Using Detached Ribs as Vortex Generators

Abstract

In recent day it is very necessary to find heat transfer characteristics of heat exchanger, heat exchanger as an important equipment widely used in day to day life, like in industry, home appliances, gas turbine, transportation, power production, in aircraft etc. the improvement of heat transfer performance of heat exchanger can done by using insertion of vortex generators in a square channel. The experimental study is conducted to examine the pressure drop characteristics in a square duct with different geometrical configuration of detached ribs, Detached Ribs as vortex generators are inserted 90˚ in a square duct having different aspect ratio (AR) of 2, 3, 5. The effect of width, pitch ratio (P/H) of inserting vortex generator, flow direction and aspect ratio of duct are examined for Reynolds numbers (Re) based on hydraulic diameter of square duct Dh, and it is in the range of 8000 to 24000. The results shows if pitch to height increases friction factor ratio decreases by 38.98% , if Reynolds number increases , 9.42% time friction factor ratio increases , if aspect ratio increases friction factor ratio decrease by 90.03%. The experiment is repeated for different AR of vortex generators 2,3,4,5, pitch ratio (P/h), width 15, 10, 6mm for different Re = 8000, 12000, 16000, 20000, 24000.

Authors and Affiliations

Harish Muki, Anandkumar S Malipatil

Keywords

Related Articles

Applying Altman’s Business Failure Prediction Model To Indian NSE Small Cap And Mid Cap Auto And Auto Ancillary Companies

It has long been established that a detailed ratios analysis has good potential to determine and establish the financial performance of an organization by evaluating its operational and financial efficiencies. Altman’s...

Automated Malaria Detection from Blood Samples Using Image Processing

Malaria is a life-threatening parasitic disease, caused by the protozoan parasites of the genus Plasmodium and is transmitted through the bite of a female Anopheles mosquito. During this process, the red blood cells (RB...

Comparison Of Various 32-Bit Parallel Prefix Adders

In Very Large Scale Integration (VLSI) designs, Parallel prefix adders (PPA) have the higher delay performance. This paper investigates four varieties of PPA’s (Kogge Stone Adder (KSA), Spanning Tree Adder (STA), Brent...

Effect of Slits in A Diverging Conical Ring Insert on Heat Transfer Enhancement in A Cylindrical Tube

Diverging conical ring insert in a cylindrical tube is a passive augmentation technique aiming to improve the heat transfer enhancement. An insert disrupts the flow creating a mixture between core and near wall fluid le...

Agent Based QoS Routing using DSR in Mobile Ad hoc Network

This paper modifies the existing DSR routing protocol by using the neuro-fuzzy agent. The proposed system uses the neural as well as the fuzzy agents to improve the QOS of DSR routing protocol. Neural and fuzzy agents a...

Download PDF file
  • EP ID EP21311
  • DOI -
  • Views 286
  • Downloads 4

How To Cite

Harish Muki, Anandkumar S Malipatil (2015). Experimental Investigation of Pressure Drop Characteristics in A Square Channel Using Detached Ribs as Vortex Generators. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 3(10), -. https://europub.co.uk/articles/-A-21311