Experimental Investigation of the Useful Use of Electricity in Thermoelectric Generators by Using Waste Flue Gas
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2014, Vol 2, Issue 4
Abstract
As wiring up the many thermoelectric generators in serial, voltage can be increased and wiring up the parallel the current can be increased. In this work, experiment set has occured with thermoelectric generators. The generator surface which is need to keep warm is heated by waste gases produced in stove pipe and cooled water is passed through the cold surface to keep cool. Electricty production has occured because of the temperature differences. During operation the changing of voltage range is observed between 5,11V and 8,69V. When the flowrate is 0,083 lt/s, the maximum performance has observed with 8,69V and 1,45A. Varying the cooling water flowrate in experiment, changing of electricty production has observed and the results has shown graphical.
Authors and Affiliations
Mehmet ÖZKAYMAK, Sahin BAŞ, Bahadır ACAR, Celil YAVUZ, Kurtulus BORAN, A. Samet TABAK, H. İbrahim VARİYENLİ, Ömer ASAL
Artificial Neural Network Based Early Warning System For Aydin Province Towards Air Factors Which Primarily Affect Human Health
Temperature, air quality index and ultraviolet index, which are basic air parameters, affect human health significantly. It is important to inform people about the precautions to be taken for these factors affecting huma...
Modelling of Wind Farms and Analysis of Effects of Wind Farms on Transmission System
In recent years, the energy demand in Turkey and the world is increasing day by day in parallel with the population growth and the developments experienced in technology. Renewable energy resources are rapidly spreading...
Design of Parallel Analog to Digital Converter Based on Darlington CMOS Inverter
This article presents a 4-bit parallel analog-to-digital converter was designed by using Darlington CMOS Inverter which is operated in accordance with CMOS threshold voltage. Thus, there is no need to use resistance arra...
The Structural, Morphological and Electrical Characterizations of InGaAsP/InP Structure
In this study, InGaAsP layer is grown on InP substrates by using Molecular Beam Epitaxy (MBE) technique. The structural and morphological properties of InGaAsP/InP structure have been investigated by means of high resolu...
Development of Metal-Porous Silicon Direct Hydrogen Fuel-Cell Production Parameters
Effect of the electrochemical etching (anodization) that is one of the manufacturing process of porous silicon (PS) on the electrical parameters of metal-porous silicon direct hydrogen cell (Metal-PS-DHC) is considerably...