Experimental Investigation on Bond Strength, Impact Strength and UPV of Concrete with Industrial By-Products
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 5
Abstract
The present Experimental investigation is to study the Bond strength of the concrete, Impact Resistance and durability study by ultrasonic pulse velocity of concrete with partial replacement of Metakaolin and GGBS(Ground Granulated Blastfurnace Slag) as binder and Copper slag as fine aggregate. Metakaolin and GGBS are varied from 5%, 10%, 15% by the weight of cement and copper slag varied from 10%, 20%, 30%, 40%, 50%, 60% by the weight of fine aggregate. Mix design is done for the M30 grade concrete with 0.38 w/c ratio. We have use the water reducing admixture as super plasticizer to maintain the water cement ratio within the minimal range. Specimens are going to test for 28 days. A through literature review was conducted to study and investigate the properties of these materials and testing methods. In this research, it is proposed to study the bond strength of the concrete by pullout test methods and Bond in reinforced concrete (RC) refers to the resistance of surrounding concrete against pulling out of reinforcing bars which embedded in the concrete. The specimens for impact studies can test by using drop weight method test which was recommended by ACI-544 Committee. Ultrasonic pulse velocity test have been conduct to determine material properties, detect defects and assess deterioration of the concrete.
Authors and Affiliations
S. Manikandan, N. Sakthieswaran, G. Shiny Brintha, O. Ganesh Babu
Keywords
Related Articles
- EP ID EP22150
- DOI -
- Views 216
- Downloads 4
Impact Of Radiation Models In CFD Simulations Of Natural Convection Heat Transfer In A Side Heated Square Cavity
The flow progress in a water-filled square cavity which is suddenly heated and cooled on the opposing sidewalls is noticed by using the CFD software package Fluent 6.3. Two approximations were used for CFD simulation of...
Study of Various Performance Parameters of Wire Electrical Discharge Machining For H11 Using Taguchi L16 Array
The main goals of wire electrical discharge machine manufacturers and users are to achieve a better stability and high productivity of the process with desired accuracy and minimum surface damage and experimentally stud...
Sixth Normal Form
Sixth Normal Form (6NF) is a term used in relational database theory by Christopher Date to describe databases which decompose relational variables to irreducible elements. While this form may be unimportant for non-tem...
An Innovative Communication System For Deaf, Dumb and Blind People
One of the most precious gifts to a human being is an ability to see, listen, speak and respond according to the situations. But there are some unfortunate ones who are deprived of this. Making a single compact device f...
Design and Fabrication of Metal Strip Cutting Machine
Metal cutting is the basic process in any steel industries, ship building and bridges. Usually the industries cut the metal manually by using chop saw. It takes lot of time to measure the required length of the metal st...