Experimental Model for Pollutants Monitoring into the Coke-Chemical Plant
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 2
Abstract
The Coke-Chemical plants contribute heavily to producing and emitting in the atmosphere a big amount of polluting agents. Polluting emissions diminution and situating them within the international specific standards, can be realized by introducing a monitoring model with automate prominence of atmospheric noxa concentrations and with the possibility of connecting it to an open communication system. In the paper is conceived an experimental model for noxa and pollutants monitoring and in a frame of a polluting field existing in the coke-chemical sector from an integrated iron and steel complex.
Authors and Affiliations
Viorel MUNTEANU, Maria VLAD, Lucica BALINT
Keywords
Related Articles
- EP ID EP655782
- DOI -
- Views 52
- Downloads 0
Industrial Research in Thicker Heavy Plates (70-80 mm) HSLA Steel Micro-Alloyed with Mo-NbTi Thermo-Mechanical Control Process in ArcelorMittal Galati
Thermomechanical rolling (TMR or TMCP) is a special rolling process resulting in an extremely high-strength, fine-grained substructure which simultaneously offers very good toughness and cold formability. TM products hav...
Comparative Characteristics of Martensite and Bainite in Cu-Based SMAs
The present work reports the evolution of micro-structure and shape memory behavior in a Cu-15 Zn-6 Al (mass. %) shape memory alloy (SMA), as a function of the applied hot working procedure and of the performed heat trea...
Hydrodynamic Aspects on EAF’s Smelt Metallic Mirror
Using the Physical and Mathematical knowledge, a new approach to EAF bath’s hydrodynamic aspects is proposed to be developed in this paper. Experimental results and a mathematical equation package have been concluded tha...
Research on Influence of Metallurgy Factors on the Quality of Metal Components in Metal-Ceramic Prosthetic Restorations
The paper summarizes the characteristics of the metal component in the structure of metal-ceramic fixed prostheses and the technological conditions for obtaining it. The paper presents partial results of an experimental...
Producing Bimetals by Direct Melting of the Bronze Machining Chips into Steel Supports
The bimetals can satisfy some requests of the working conditions impossible to be obtained using one single metallic material. The bimetallic pieces are obtained by the different production methods by covering of a steel...