Experimental research into aerodynamic characteristics of a nacelle with the enabled system of engine thrust neutralization
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 8
Abstract
We have conducted an experimental study into aerodynamic characteristics of the structural scheme “wing ‒ twocircuit engine nacelle”. The data were acquired in the course of work of a promising system for the neutralization of a twocircuit engine’s thrust of a large bypass ratio at aircraft landing. The relevance of the conducted study relates to the improvement of operational performance of a passenger aircraft. Based on the analysis of functions and principal schemes of reversible devices at cargo and passenger airplanes, we have proposed a promising method to neutralize the thrust of a twocircuit engine with a high bypass ratio. Physical essence of the method for neutralization of the engine’s thrust is to substantially restrict an airflow into the engine by a technique to rotate working blades of the fan at the time of landing. We have devised a specialized procedure for conducting a weighting and drainage experiment with a model of the nacelle of a turbojet twocircuit engine in a wind tunnel. The obtained experimental data make it possible to evaluate the limits of the investigated method for neutralizing the thrust in order to shorten the length of aircraft run. By conducting a drainage experiment and applying a tuft flow visualization technique, we identified the detachment of a flow at the outer surface of the nacelle’s model with a completely closed entrance. The presence of the flow detachment predetermined an increase in the frontal drag of the nacelle model by approximately 2.5 times, revealed by the weight experiment. In the course of the weight experiment it was established that the existence of a screening surface (while the engine’s nacelle approaches a runway) increases frontal drag of the nacelle model by approximately 14 %. The drainage experiment found that such an increase in the frontal drag was due to a significant redistribution of pressure at the surface of the nacelle model. The study has shown that the idea of closing the entrance to the engine that has a large bypass ratio at the time of aircraft landing is one of the promising methods for shortening the run length of the aircraft
Authors and Affiliations
Vasiliy Loginov, Yevhen Ukrainets, Igor Kravchenko, Alexandr Yelanskiy
Keywords
Related Articles
- EP ID EP528303
- DOI 10.15587/1729-4061.2018.147986
- Views 41
- Downloads 0
Development of models and research into tooling for machining centers
<p>We have constructed three-dimensional solid models for tool storage of the disk type (for 14 instruments) and the chain type for 32 tools, mounted onto the side surface of a machine column. We propose a 3D model of th...
Development of a method for the synthesis of a threedimensional model of power transmission lines for visualization systems of training complexes
<p class="a"><span lang="EN-US">Representation of the wire line shape depending on the wire tension and temperature was considered. A method was developed for constructing a geometric threedimensional line model and syn...
Studying the physicochemical regularities in the color- and phase formation processes of clinker ceramic materials
<p>The paper reports results of a comprehensive study, aimed at developing formulation-technological parameters for obtaining volumetrically dyed clinker ceramic materials with a wide range of colors. A possibility has b...
Development of principles to control the processes of continuous casting of alloys using magnetodynamic equipment
<p><span style="font-family: 'Times New Roman'; font-size: small;">A new principle to control the temperature and mass flow rate of metal melt at its continuous casting has been proposed. It has been established that suc...
Modeling a thermal conductivity process under the action of flame on the wall of fireretardant reed
<p>Creating environmentally friendly flame-retardant materials for natural inflammable roof structures will make it possible to control the processes of thermal stability and physical-chemical properties of a protective...