Experimental research procedure of roller forming unit
Journal Title: Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini - Year 2023, Vol 1, Issue 102
Abstract
Experimental research is conducted followed by a comparative analysis of the results, which are obtained in the process of theoretical and experi-mental studies, to check the theoretical research adequacy of the roller forming unit with the crank drive. We have developed the experimental research program for the roller forming unit with the crank drive. The research stand of roller forming with the crank drive was used for experimental studies. This research stand allows you to carry out full-value experimental studies on the determination of dynamic loads unrestricted. The experimental research program provides the determination of the interaction force for the compaction roller with the construction mixture, the force in the unit connecting rod, the torque on the unit drive shaft and the power, which is necessary for the realization of the forming process. The determina-tion of these loads will make it possible to realisti-cally assess the condition of the forming unit and rationally carry out its design and operation. Plan, procedure and processing of experimental research data have been developed. The measuring and recording equipment were selected to deter-mine the force loads of the research stand for conducting experimental studies, which trans-forms the received numerical data into Microsoft Excel for their processing. The measurement of the force in the connecting rod and the interaction vertical force of the compaction roller with the construction mixture was carried out using strain gauges. These are pasted according to the bridge scheme on the connecting rod and the metal plate, which is located in the form with the building mixture under the compaction roller. RK 435 universal clamps, which make it possible to measure the line voltage, the current strength and the power under unit different load modes, are used to measure the power required for the forming process.
Authors and Affiliations
Viacheslav Loveikin, Kostiantyn Pochka, Maksym Balaka, Olha Pochka
Keywords
Related Articles
- EP ID EP745292
- DOI https://doi.org/10.32347/gbdmm.2023.102.0302
- Views 28
- Downloads 0
Design procedure of reach stacker control system
Reach stackers are efficient and maneuverable machinery for an overload of overall containers in cargo terminals and ports today. Such machinery design determines the practical interest of the engineering industry specia...
Review and analysis of software simulators for robotic information systems
The rapid development of educational technolo-gies requires the active involvement of new means and effective teaching methods. One of the innovative tools of learning in the field of robotics is the use of robot simulat...
Analysis of studies of stationary tower cranes under wind loads
Loading and unloading operations are an integral part of the technological process of construction. Cranes of various types are mostly used to per-form these works. In modern industrial and civil construction, tower cra...
Development of the information model of the soil cutting process spatially oriented knife of dynamic action
The results of the construction of an information model of the process of soil cutting with straight-furrow oriented knives of dynamic action are giv-en. Bulldozer equipment and its main tasks are considered. A working h...
Experimental research procedure of roller forming unit
Experimental research is conducted followed by a comparative analysis of the results, which are obtained in the process of theoretical and experi-mental studies, to check the theoretical research adequacy of the roller f...