Experimental researches of parameters technological process of the improved beets tops purifier
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 92, Issue 4
Abstract
In this article, the problem of the need to improve existing and development of essentially new beet-harvesting machines is investigated since the existing ones do not fully satisfy the agronomic requirements for the process of harvesting roots. The results of experimental studies of the improved beet-harvesting machine are presented. The technological efficiency of application of the improved design of the cutter of the remnants of the wedge was determined by conducting field comparative studies of the two types of denominators, which distinguished themselves from the constructive execution of the comb copier and knife. The surface of the reviews and their two-dimensional sections of the damage to the root crops and the number of cut root crops from the soil were constructed, depending on the speed of the root-crop modulus and the height of the root crops.
Authors and Affiliations
Anna Tson, Viktor Baranovskyi, Oleh Liashuk, Taras Dovbush
Keywords
Related Articles
- EP ID EP521755
- DOI 10.33108/visnyk_tntu2018.04.060
- Views 40
- Downloads 0
Increasing of efficiency of manual arc welding and surfacing of engineering products
The data on the exothermic mixture amount in the electrodes coating influence on their heating and melting are given. Experimental methods found that exothermic reactions in the stage of heating and melting take place at...
Evaluation of the structures metal damage under the static and cyclic loadings according to the coersive force value
The results of experimental investigations of the damage degree of the ferromagnetic steel 05kp and austenitic (paramagnetic in the initial state) steel АISI 304 under the static and cyclic loading according to the coerc...
Destruction zone near the tip of interfacial crack at a prevailing tensile loading
Under the plane strain conditions at the prevailing tensile loading by Wiener-Hopf method the solutions of problems about the calculation of a small-scale destruction zone in the pre-fracture zone part, which is adjacent...
Effect of ionic strength on electro corrosion in chloride and chloride-sulfate environments
Corrosion tests in 12 model environments simulating the composition of soil electrolytes at different levels of current density has been made. For the best comparative analysis, the ionic strength of the electrolyte has...
Parameter justification for interworking relationship of elastic screw operating element with grain material
Famous constructions of auger operating elements with elastic surfaces and screw operating conveyors have been analyzed. New construction of auger conveyor with elastic screw surface was developed and designed. The influ...