Experimental Results at Modeling of the Flow and Deformation Fields at the Profiles Rolling
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 1
Abstract
This paper presents the results for modeling of the rolling process based at the deformable continuous medium mechanics, the theory of field lines. The rolling of the profiles and plates may be evaluated as the plane strain state process. Using the equations of the continuous medium and the initial conditions and the limits conditions we solved the speed field, the strain rate field, the strain field. Applying an adequate computation program we obtained the values of the field factors of modeling process. The results are showed into this paper.
Authors and Affiliations
Nicolae CĂNĂNĂU, Ionel PETREA, Gheorghe COROBETE
Keywords
Related Articles
- EP ID EP663905
- DOI -
- Views 74
- Downloads 0
Methods to Reduce Gas Emissions Onboard Ships
Regarding the latest IMO requirements, the EEDI (Energy Efficiency Design Index) is mandatory to be limited as levels under IMO MEPC requirements. The paper presents some paths to reduce EEDI as are applied onboard a 555...
Thermal Decomposition of Hafnium Ethoxide-Mollecular Precursor for Hafnia Dielectric Thin Films
The HfO2 thin-film is a very promising gate dielectric material for last generation transistors. The paper presents the thermal decomposition of hafnium ethoxide used as molecular precursor for obtaining hafnia thin film...
Evolution of Some Structural Fine Parameter in the Superficial Layer during Low Cycle Fatigue Process
Using laminate samples, investigations have been realized at variable solicitation of pure bending on a patented machine. The machine has two working places and it can be adjusted for different deformations, frequencies...
Energy Disequilibrium Effects in Heat Treatment Equipment
The differences found between heat fluxes in different areas of the heat treatment equipment workspace, due to energy disequilibrium or due to improper positioning of loading, can cause non-uniform temperatures and heat...
Granularly Unbind Materials for Casting Composite Moulds
This paper present some partial result based on this idea (of pollution prevention) the domain of making composite-casting moulds (in time of casting, solidifying, and alloy cooling). Casting process impose temporary or...