Granularly Unbind Materials for Casting Composite Moulds
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 1
Abstract
This paper present some partial result based on this idea (of pollution prevention) the domain of making composite-casting moulds (in time of casting, solidifying, and alloy cooling). Casting process impose temporary or permanent moulds in classical approach, capable to assure the liquid alloy flow and cooling. The moulds made by bound mixtures are considerer the most dangerous sources in foundries. Initially the mould is made only by gasified model and dry siliceous sand, the casting of the alloy concomitant with the thermo-destruction of the model and decomposing the products of thermo-destruction , filtering through the mould wall it makes possible realization the mould composite- siliceous- graphite, favorable the process of interface metal-mould. The elimination of the binder and of the separation plane, the raising of thermal conductivity of the mould and even the retention of thermo-destruction products in inter-granular spaces could be a solution to minimize the contamination in foundry.
Authors and Affiliations
Ioan MARGINEAN, Mihai TARCOLEA, Vasile MIREA, Sorin-Adrian COCOLAS
Keywords
Related Articles
- EP ID EP663123
- DOI -
- Views 72
- Downloads 0
Influence of Niobium as Microalloying Element in 3%Si Steel Grade for Electrical Industry
The paper presents the results of the laboratory research on the chemical composition and crystallographic texture in 3% Si steels and their influence on the level of magnetic losses in the final sheet. The magnetic prop...
Creating Integrated System Between Lifecycle Quality Management and Finite Element Analysis to Improve Typical Turbine Blade Design as a Case Study
This article proposes a process to integrate efficiently the Finite Element Analysis in the Quality Life-Cycle Management in order to use the simulation engineering in analyzing and improving the design of one industrial...
Dimensional Changes in Some Iron-Based Powder Metallurgy Alloys
The purpose of this paper is to present the dimensional changes in some ironbased (P/M) alloys. The specimens produced from atomized iron powder and alloyed powder with different sizes (< 45, 45-63, 63-100, 100-150, >150...
Protective and Decorative Vacuum’s Coatings on Wares of Artistic Castings
The problem of environmental protection is extraordinarily important, and its actuality will increase with every year. In this aspect, processes of depositing of coatings in vacuum have got serious advantages before wide...
Energetic and Exergetic Efficiencies of Biomass Gasification Processes
A promising way to use biomass for the production of heat, electricity and other biofuels is through biomass gasification. In the gasification process, the chemical energy of the solid fuel is converted into the chemical...